지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학위논문
- 저자정보
- 지도교수
- 이두형.
- 발행연도
- 2020
- 저작권
- 경북대학교 논문은 저작권에 의해 보호받습니다.
이용수1
이 논문의 연구 히스토리 (2)
- 이 논문의 후속연구가 궁금하신가요?
- 연관 학술논문 또는 학술발표를 통해 보다 발전된 연구결과를 확인하실 수 있습니다.
- 이 논문의 연구 히스토리 확인하기
초록· 키워드
오류제보하기
Purpose: The aim of this study was to investigate the effects of soaking of laser-treated implants in 0.9% NaCl solution for 2 weeks on the surface hydrophilicity and the removal torque (RTQ) of each implant that inserted in rabbit tibia for initial healing period of 10 days.
Materials and methods: Twenty machined titanium surface screws were produced with a diameter
3 mm, length 8 mm. Ten screws had their surface treated with a laser only (laser treated group), and the other 10 were soaked in saline for 2 weeks after surface treatment with a laser(laser treated + saline soaked group). Implants were inserted in rabbit tibia (ten adult New Zealand white rabbits), and the RTQ of each implant was measured after 10 days. The wettability among implants was compared by measuring the contact angle. Surface composition and surface topography were analyzed.
Results: After 10 days, the laser treat + soaking group implants had a significantly higher mean RTQ than the laser treated implants (P = .002). There were no significant morphological differences between groups, and no remarkable differences were found between the two groups in the SEM analysis.
Conclusion: Saline soaking implants is expected to produce excellent RTQ and surface analysis results.
Keywords: Implant; Laser; Removal torque; NaCl; Wettability
Materials and methods: Twenty machined titanium surface screws were produced with a diameter
3 mm, length 8 mm. Ten screws had their surface treated with a laser only (laser treated group), and the other 10 were soaked in saline for 2 weeks after surface treatment with a laser(laser treated + saline soaked group). Implants were inserted in rabbit tibia (ten adult New Zealand white rabbits), and the RTQ of each implant was measured after 10 days. The wettability among implants was compared by measuring the contact angle. Surface composition and surface topography were analyzed.
Results: After 10 days, the laser treat + soaking group implants had a significantly higher mean RTQ than the laser treated implants (P = .002). There were no significant morphological differences between groups, and no remarkable differences were found between the two groups in the SEM analysis.
Conclusion: Saline soaking implants is expected to produce excellent RTQ and surface analysis results.
Keywords: Implant; Laser; Removal torque; NaCl; Wettability
목차
I. Introduction 1II. Materials and Methods 3III. Results 61. Surface analysis 61) Surface topography 62) Roughness 83) Contact angle 92. Torque values 10IV. Discussion 12V. Conclusions 14VI. References 15
최근 본 자료
댓글(0)
0