메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학위논문
저자정보

김정훈 (충남대학교, 忠南大學校 에너지科學技術大學院)

지도교수
조철희, 이진석
발행연도
2020
저작권
충남대학교 논문은 저작권에 의해 보호받습니다.

이용수6

표지
AI에게 요청하기
추천
검색

이 논문의 연구 히스토리 (4)

초록· 키워드

오류제보하기
In this study, since we design and make equipment for backsheet removal, we establish 6 step backsheet removal process using backsheet remover. Also we evaluated the relationship between the peeling behavior of the backsheet of a photovoltaic(PV) module and its surface temperature in order to backsheet removal from the PV module. The backsheet does not peel off at low temperatures. Contrastively part of the backsheet remains on the surface of the PV module after the peeling process at high temperatures. X-ray diffraction(XRD) analysis is performed to investigate the backsheet material remaining on the surface of the PV module. As a result, that is confirmed poly-ethylene(PE). The interfacial characteristics of the layers of the PV module is investigated by differential scanning calorimetry(DSC) analysis. The melting temperature(Tm) of laminated ethylene vinyl acetate(EVA) and of the backsheet on the PV module are analyzed using DSC. It is found that the backsheet does not peel off below the Tm of ethylene of EVA whereas, the PE layer of the backsheet remains on the surface of the PV module above the Tm of the PE after backsheet peeling process. Therefore, at a temperature between Tm of ethylene and that of PE layer, The backsheet is best removed. The technology to remove the backsheet from PV module could be use not only for PV module recycling, but also for PV module repair.

목차

제 1장 서 론 1
제 2장 배 경 3
2.1 태양광 모듈 재활용의 필요성 3
2.1.1 태양광 모듈 설치 현황 및 전망 3
2.1.2 태양광 폐모듈 발생 현황 및 전망 6
2.1.3 태양광 모듈 재활용의 필요성 9
2.2 태양광 모듈 재활용 기술 11
2.2.1 결정질 실리콘 태양광 모듈의 구조 11
2.2.2 태양광 모듈 EVA 제거 기술 14
2.2.2.1 물리적 방법 15
2.2.2.2 화학적 방법 18
2.2.2.3 열적 방법 21
2.2.3 태양광 모듈 백시트 제거 기술 24
2.2.3.1 EVA 제거 기술의 문제점 24
2.2.3.2 백시트 제거 기술 동향 27
2.2.3.3 재사용/재활용 모두에 사용 가능한 백시트 제거 기술 31
제 3장 실험방법 33
3.1 자동화 백시트 박리 장치 설계 33
3.2 4-Cell 미니모듈 제작 35
3.3 4-Cell 미니모듈 및 60-Cell 상용모듈 백시트 박리 37
제 4장 결과 및 고찰 40
4.1 자동화 백시트 박리 장치 제작 40
4.1.1 백시트 박리 장치 제원 40
4.1.2 백시트 박리 장치 기능 최적화 43
4.2 4-Cell 미니모듈 백시트 박리 거동 분석 48
4.2.1 백시트 박리 전처리 공정 48
4.2.2 표면 온도 제어 영향 평가 50
4.2.3 백시트 박리 거동 DSC 열적 해석 및 EL 광학적 해석 55
4.3 60-Cell 상용모듈 백시트 박리 거동 분석 61
제 5장 결 론 64
참고문헌 65
Abstract 73

최근 본 자료

전체보기

댓글(0)

0