메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학위논문
저자정보

이희진 (충북대학교, 충북대학교 대학원)

지도교수
최호용
발행연도
2021
저작권
충북대학교 논문은 저작권에 의해 보호받습니다.

이용수5

표지
AI에게 요청하기
추천
검색

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
In this thesis, a 2-ch DC-DC converter with a wide-input voltage range for wearable AMOLED displays has been designed. For positive voltage , a boost converter is designed using both an over-charged voltage permissible circuit (OPC) which generates a normal output voltage even if over-input voltage is applied, and a SPWM-PWM dual mode with 3-segmented power transistors to improve efficiency at light load. For negative voltage , a 0.5 x regulated inverting charge pump is designed to increase power efficiency and reduce chip area. The proposed DC-DC converter was designed using a high voltage 0.18-㎛ BCDMOS process. Measurement results show that the proposed DC-DC converter generates positive voltages of 4.6 V and negative voltage of ?0.6 V to ?2.3 V for input voltage of 2.9 V to 5.6 V. In addition, it has power efficiency of 20% ~ 73%, and output ripple voltage has less than 20 mV for load current range of 1 mA ~ 70 mA.

목차

Ⅰ. 서 론 1
Ⅱ. DC-DC 변환기의 개요 3
2.1. DC-DC 변환기의 구조 및 동작 3
2.2. DC-DC 변환기의 제어 방식 6
Ⅲ. 넓은 입력 전압 범위를 가지는 웨어러블 AMOLED 디스플레이용 2-채널 DC-DC 변환기 설계 9
3.1. 양의 전압 11
3.1.1. SPWM-PWM 듀얼 모드 13
3.1.2. 파워 트랜지스터 3-분할 17
3.1.3. Over-charged permissible circuit 회로 21
3.2. 음의 전압 25
3.2.1. 0.5x 모드 인버팅 차지 펌프 27
3.2.2. PSM 제어기 29
3.2.3. 출력 전압 가변 회로 30
Ⅳ. 칩 측정 결과 32
4.1. 출력 전압 34
4.2. 스위칭 주파수 및 폭 분할 제어 신호 36
4.3. OPC 전압 38
4.4. Regulation 및 Transient 특성 39
4.5. 전력 효율 41
4.6. 전기적 특성 비교 42
Ⅴ. 결 론 44
참고문헌 45
감사의 글 48

최근 본 자료

전체보기

댓글(0)

0