메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학위논문
저자정보

우정원 (전주대학교, 전주대학교 일반대학원)

지도교수
김은수
발행연도
2022
저작권
전주대학교 논문은 저작권에 의해 보호받습니다.

이용수17

표지
AI에게 요청하기
추천
검색

이 논문의 연구 히스토리 (7)

초록· 키워드

오류제보하기
In this thesis, a 3-phase single-stage AC-DC converter is proposed for the AGV(Automated Guided Vehicle) wireless charging system, and the main circuit operation characteristics are analyzed.
A 1-kW prototype was fabricated to demonstrate its applicability experimentally.
Under load conditions (from 75 W to 1 kW) through a phase-shifted modulation at a fixed switching frequency, it is found that the proposed converter can be controlled within a wide output voltage range of 39?54 VDC under the coupling (40?60 mm range of air gap) between the primary and secondary windings of a loosely coupled transformer.
Through the experimental results, it was shown that the proposed converter could operate robustly to changes in air gaps. In addition, the improvement in the THDi and the input power factor (PF), as well as the efficiency improvement (above 90 % at the rated load) by soft-switching were also verified.

목차

제 1 장 서 론 .....................................................................................................1
제 2 장 무선전력전송시스템을 위한 3상
단일전력단 교류-직류 컨버터..............................................................8
2.1 3상 교류-직류 컨버터 주회로 동작모드..........................................11
2.2 3상 단일전력단 교류-직류 컨버터 입력역률보정회로
동작특성 분석..................................................................................19
2.2.1 입력역률보정회로 교류-직류단 출력전압 VLink 유도...........................................................19
2.2.2 입력역률과 전고조파왜형률...............................................28
2.3 직류-직류단 직렬-직렬 보상회로 이득특성분석............................31
제 3 장 실험 결과 .............................................................................................37
제 4 장 결론 .......................................................................................................45
참고 문헌 ...............................................................................................................46

최근 본 자료

전체보기

댓글(0)

0