과거 산업혁명을 계기로 산업화가 이루어지고 도시가 급격하게 성장하게 되면서 도시에 거주하는 인구의 비중이 크게 증가되었다. 실제로 지난 1800년대의 도시 거주 인구는 전체 세계인구 중 3%에 불과했지만 2008년에는 절반 수준까지 증가하였으며, 2040년에는 약 65% 수준에 이를 것으로 전망되고 있다. 이러한 급속한 인구 도시집중은 열섬현상, 대기오염, 토양오염, 자연재해 증가 등의 생태 환경의 변화와 더불어 수많은 건축물과 도로가 새롭게 건설되어졌다. 또한 급속한 도시개발은 역사적으로 가치가 높은 고건축물(古建築物)이 수명에 도달하지 못하고 철거되고 그 위치에 새로운 건축물과 도로, 지하철, 철도 등이 건설되는 과정들이 반복되었다. 이러한 역사적인 건축물을 보호하고 자연재해로부터 건축물을 보호하기 위하여 다양한 건축물의 평행이동 기술이 발달하였다. 건축물 평행이동은 건축물을 해체하지 않고 수평 방향(직선 또는 곡선 방향)으로 이동하거나 회전함으로써 특정 위치에서 새로운 위치로 옮기는 것을 말한다. 이러한 건축물 평행이동 공법은 경제적으로 가치가 있는 건축물을 보호하거나 역사적인 건축물을 보전하기 위하여 전 세계적으로 많은 관심과 기술의 중요성을 야기되고 있다. 건축물 평행이동 기술개발과 연구가 활발하게 이루어지고 있는 미국, 유럽, 그리고 일본과 중국에 비해 대한민국은 건축물 평행이동 연구와 기술개발이 다소 미흡하고 건축물 평행이동 시공이 활발하게 이루어지고 있지 않은 상황이다.
대한민국은 건축물 평행이동 기술 수준뿐만 아니라 각종 정책 및 제도들의 연구가 미국, 유럽, 그리고 아시아의 다른 나라들에 비해 다소 부족하며, 선진국보다 기술적 격차가 있다고 생각되어 국내에서도 건축물 평행이동에 관한 연구가 필요하다고 생각한다. 따라서 본 연구에서는 건축물 평행이동 공법에 관해 국내외 사례를 조사하고 Jack-Pile(이하 잭파일)과 강봉을 활용한 건축물 평행이동에 관한 현장 적용사례를 소개하고자 하였다.
해당 연구를 위해 첫 번째로 건축물 평행이동에 근본이 되는 잭파일에 대해 조사하고, 두 번째로 국내와 외국의 건축물 평행이동 사례를 조사하고, 다양한 건축물 평행이동 공법 비교를 통해 해당 건축물에 사용된 평행이동 기술이 갖는 특징을 제시하고자 하였다. 또한 잭파일과 강봉을 활용한 국내의 건축물 수직, 평행, 회전 이동 사례에 대해 조사 제시하였다.
As industrialization took place in the wake of the industrial revolution in the past and cities grew rapidly, the proportion of the population residing in cities greatly increased. In fact, in the 1800s, the population living in cities accounted for only 3% of the total world population, but in 2008 it increased to half, and is expected to reach about 65% in 2040. This rapid concentration of population in cities has led to the construction of numerous buildings and roads along with changes in the ecological environment such as the heat island phenomenon, air pollution, soil pollution, and increased natural disasters. In addition, rapid urban development led to repeated processes in which historically valuable old buildings were demolished before reaching their lifespan and new buildings, roads, subways, and railroads were built in their place. In order to protect these historic buildings and protect them from natural disasters, parallel movement technologies for various buildings have been developed. Parallel movement of a building refers to moving a building from a specific location to a new location by moving or rotating it in a horizontal direction (straight or curved direction) without dismantling it. The construction method of parallel movement of buildings is arousing much interest and importance of technology around the world in order to protect economically valuable buildings or to preserve historic buildings. Compared to the United States, Europe, and Japan and China, where parallel movement technology development and research for buildings are being actively carried out, South Korea''s parallel movement research and technology development for buildings is somewhat insufficient, and parallel movement construction for buildings is not being actively carried out. Korea is somewhat lacking in research on various policies and systems as well as the level of parallel movement of buildings compared to other countries in the United States, Europe, and Asia, and it is thought that there is a technological gap compared to developed countries, so research on parallel movement of buildings is necessary in Korea as well. I think it is. Therefore, in this study, we tried to investigate domestic and foreign cases regarding the parallel movement method of buildings and introduce field application cases of parallel movement of buildings using Jack-Pile (hereafter referred to as jack pile) and steel bars. For this study, first, jack piles, which are fundamental to parallel movement of buildings, are investigated, and second, cases of parallel movement of buildings in Korea and foreign countries are investigated. I tried to present the characteristics of mobile technology. Finally, cases of vertical, parallel, and rotational movement of domestic buildings using jack piles and steel rods were investigated and presented.
제1장 서 론 11. 연구배경 및 목적 12. 연구범위 및 방법 3제2장 이론적 배경 51. 건축물 평행이동의 정의 52. 건축물 평행이동의 종류 52.1 수평 이동 52.2 수직 이동 62.3 회전 이동 73. 건축물 평행이동 원인 74. 선행연구 고찰 8제3장 건축물 평행이동 공법의 종류 111. 건축물 평행이동 공법 분류 112. 해체이동 122.1 부분 해체 이동 122.2 완전 해체 이동 133. 비해체 이동 193.1 해상 이동 193.2 트레일러를 이용한 이동 193.3 슬라이딩(Sliding), 롤링(Rolling)을 이용한 이동 203.3.1 구산성당 223.4 바퀴 및 레일 이동 방식 253.4.1 중국 지난시 수도원 253.4.2 중국 저장성 닝보 건축 문화재 283.4.3 히로사키성 천수각 303.4.4 스위치 취리히 머신 팩토리 건물 323.5 유압식 로봇 다리를 이용한 평행이동 353.6 건축물 평행이동 사례 조사 결과 38제4장 건축물 인상, 회전, 평행이동 공법 제안 394.1 기초파일의 종류 394.1.1 마이크로파일 (Micro Pile) 394.1.2 헬리컬 파일 (Helical Pile) 404.1.3 Screw Anchor Pile (SAP 공법) 414.2 잭파일 공법을 이용한 건축물 인상 424.3 강봉을 활용한 건축물 평행이동 464.4 평행이동 및 회전 사례 연구 474.4.1 잭파일과 강봉을 이용한 평행이동 및 회전사례 - 1 474.4.2 잭파일과 강봉을 이용한 평행이동 및 회전사례 - 2 534.5 건축물 평행이동 및 회전이동 사례조사 소결 66제5장 결론 68