지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술대회자료
- 저자정보
- 발행연도
- 1999.6
- 수록면
- 120 - 124 (5page)
이용수
초록· 키워드
오류제보하기
Dissolved and colloidal substances released from pulps into process waters can accumulate and give detrimental effects on papermaking, especially in paper machine systems with a high degree or water system closure. It has been reported in the literature that beating of chemical pulps in the stock preparation can result in considerable dissolution and dispersion of fibre substances.
Three ECF- and four TCF-bleached pulps delivered in dry form to the Sappi Austria AG fine paper mill in Gratkorn, including both softwood and hardwood pulps, were beaten in a Valley laboratory beater. Refiner beating in the mill was investigated by analysis of samples taken before and after the refiners. The dissolved and colloidal substances in the waters were separated from the fibres by centrifugation and were ana lysed by standard determinations and by GC analysis of carbohydrates and lipophilic extractives (resin).
Considerable amounts of organic material was dissolved and dispersed already during slushing of the pulps. During beating in the Valley beater the concentrations increased further by 6-32%. Beating in the paper mill released little organic material from the pulps. The released dissolved and colloidal substances were mainly composed of hemicelluloses. with xylans as the dominant group. both for hardwood and softwood pulps. More lipophilic extractives were released from birch pulps than from eucalypt and softwood pulps. In mill samples. starch was the dominating dissolved material. Starch is used in the mill both in the wet end and as a coating color component.
It was concluded that the amounts of dissolved and colloidal substances coming in with chemical pulps to the wet end of papermaking are dependent mainly on the cfficiency of pulp washing in the pulp mill. Only some additional fibre material is dissolved or dispersed during beating.
Three ECF- and four TCF-bleached pulps delivered in dry form to the Sappi Austria AG fine paper mill in Gratkorn, including both softwood and hardwood pulps, were beaten in a Valley laboratory beater. Refiner beating in the mill was investigated by analysis of samples taken before and after the refiners. The dissolved and colloidal substances in the waters were separated from the fibres by centrifugation and were ana lysed by standard determinations and by GC analysis of carbohydrates and lipophilic extractives (resin).
Considerable amounts of organic material was dissolved and dispersed already during slushing of the pulps. During beating in the Valley beater the concentrations increased further by 6-32%. Beating in the paper mill released little organic material from the pulps. The released dissolved and colloidal substances were mainly composed of hemicelluloses. with xylans as the dominant group. both for hardwood and softwood pulps. More lipophilic extractives were released from birch pulps than from eucalypt and softwood pulps. In mill samples. starch was the dominating dissolved material. Starch is used in the mill both in the wet end and as a coating color component.
It was concluded that the amounts of dissolved and colloidal substances coming in with chemical pulps to the wet end of papermaking are dependent mainly on the cfficiency of pulp washing in the pulp mill. Only some additional fibre material is dissolved or dispersed during beating.
목차
ABSTRACT
INTRODUCTION
EXPERIMENTAL
RESULTS AND DISCUSSION
CONCLUSIONS
ACKNOWLEDGEMENTS
REFERENCES
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
[Oral Session 3] USE OF ENZYMES FOR MODIFICATION OF DISSOLVED AND COLLOIDAL SUBSTANCES IN PROCESS WATERS OF MECHANICAL PULPING
한국펄프종이학회 기타 간행물
1999 .06
-
Organic Acid Based Pulping of Wheat Straw for Production of Paper Grade Pulp
한국펄프종이학회 기타 간행물
2006 .06
-
개미산–과산화수소 펄핑에 의하여 생산된 백합나무 펄프의 화학적 및 역학적 특성 분석
펄프·종이기술
2013 .02
-
침 · 활엽수 LAS Pulp의 수초특성
한국펄프·종이공학회 학술발표논문집
2019 .04
-
활엽수 표백 크라프트 펄프 대체용 바가스 펄프의 배합비에 따른 수초지의 강도 특성 변화
펄프·종이기술
2017 .02
-
건식분쇄와 분급에 의한 용해용 펄프의 특성변화
펄프·종이기술
2015 .10
-
각종 단섬유펄프를 이용한 화선지 제조
펄프·종이기술
2005 .06
-
원료의 배합 비율에 따른 펄프몰드 구조 및 흡수성 변화 연구
펄프·종이기술
2018 .10
-
Papermaking Characteristics of Kudzu Root Fibers with Different Morphology
펄프·종이기술
2018 .10
-
Quality Improvement of Rayon Grade Bamboo Pulp by Modified Bleaching
펄프·종이기술
2011 .06
-
기능성 섬유원료 개발을 위한 연잎줄기 펄프의 특성
펄프·종이기술
2010 .06
-
버섯 폐 배지를 이용한 펄프화에 관한 연구
한국펄프·종이공학회 학술발표논문집
2016 .04
-
산처리가 펄프의 금속 이온 제거 및 백색도에 미치는 영향
펄프·종이기술
2008 .12
-
습식성형 조건에 의한 습식펄프몰드 특성변화
펄프·종이기술
2020 .08
-
Effect of separate and mixed refining of hardwood and softwood pulps on paper properties
펄프·종이기술
2011 .10
-
MARKET PULP 현황과 전망
한국펄프종이학회 기타 간행물
2008 .11
-
베트남산 대나무의 펄프화 특성
펄프·종이기술
2009 .12
-
마이크로 펄프를 이용한 종이의 물성 개선
펄프·종이기술
2008 .03
-
칡뿌리 섬유의 특성 및 섬유 자원화에 관한 연구(제2보) : 칡뿌리 섬유의 펄프화 및 쉬트 표면 특성
펄프·종이기술
2011 .06
-
[Poster Presentation] IS THE EXTRACTIVES PLAY ANY POLE IN COLORING PULPS FROM Pinus pinaster?
한국펄프종이학회 기타 간행물
1999 .06
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2009-586-014215741