지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
ABSTRACT
1. 서론
2. 지배방정식
3. 지배방정식의 변환
4. 수치예
5. 결론
참고문헌
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
[연구논문] 다층보 자유단 부위의 열응력
대한용접·접합학회지
2005 .02
접착층을 갖는 겹층보의 열응력해석 ( Thermal Stress Analysis of a Layered beam with Adhesive Layer )
대한기계학회 춘추학술대회
1997 .01
Influence of the presence of defects on the stresses shear distribution in the adhesive layer for the single-lap bonded joint
Structural engineering and mechanics : An international journal
2015 .01
접착층 필릿을 갖는 맞대기 접착접합이음의 강도평가
한국자동차공학회 춘 추계 학술대회 논문집
1998 .05
Analytical and numerical modeling of interfacial stresses in beams bonded with a thin plate
Advances in computational design
2017 .01
Relaxation of Singular Stress in Adhesively Bonded Joint at High Temperature
반도체디스플레이기술학회지
2018 .01
용사 열차폐 코팅층의 두께가 열응력에 미치는 영향
대한용접학회 특별강연 및 학술발표대회 개요집
2004 .05
취성접착제를 사용한 접착이음의 강도평가에 대한 해석
한국기계기술학회지
2010 .01
가스터빈 2단 블레이드에서의 열 및 기계적 응력 분포
대한기계학회 춘추학술대회
2008 .05
Elastic analysis effect of adhesive layer characteristics in steel beam strengthened with a fiber-reinforced polymer plates
Structural engineering and mechanics : An international journal
2016 .01
응력적층보의 거동에 대한 실험적 연구
대한토목학회 학술대회
2009 .10
Improved analytical method for adhesive stresses in plated beam: Effect of shear deformation
Advances in concrete construction
2019 .01
Calibration Device of Surface Residual Stress Measurement using Full Stress Beam
한국표면공학회 학술발표회 초록집
2008 .06
T형 접착이음의 응력 해석
한국자동차공학회 춘 추계 학술대회 논문집
1996 .06
고강도 콘크리트를 사용한 R.C보의 부착강도에 관한 실험적 연구 ( An Experimental study on the Bond in Reinforced Concrete Beam with high Strength Concrete )
대한건축학회 학술발표대회 논문집 - 구조계
1986 .04
Thermal Stress Simulation of Mass Concrete Using Thermal Stress Device
한국콘크리트학회 학술대회 논문집
2006 .05
경계요소법을 이용한 반도체 패키지의 응력특이성 해석
한국생산제조학회지
2007 .12
접착접합 계면에 대한 초음파시험과 응력해석
대한기계학회 춘추학술대회
2002 .05
면외 워핑함수를 고려한 보 구조물의 기계 및 열응력 해석
한국전산구조공학회논문집
2016 .01
Interfacial stresses in RC beam bonded with a functionally graded material plate
Structural engineering and mechanics : An international journal
2016 .01
0