메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
한국기계가공학회 한국기계가공학회지 한국기계가공학회지 제2권 제1호
발행연도
2003.3
수록면
15 - 21 (7page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The ultrasonic polishing machine was developed to get super finishing that consist of machine part that can rotate and travel the main shaft with power 1.5kW, ultrasonic generator with frequency 20kHz. By using this machine we were investigated the characteristics of ultrasonic polishing for three different ceramics, and so could be obtained following results First, we could be obtained the excellent surface for hard-to-difficult cutting materials Second, the effect of surface roughness for the feed rate could be shown that the more the feed rate increases, the more the value of surface roughness increases Third, owing to the characteristics being progressed brittle fracture in Al2O3 polishing with this machine, the value of surface roughness is larger than other ceramics Forth, because the ultrasonic polishing can be smoother than the existing grinding in discharging the chips, It could be possible to Improve the surface roughness about up to 15%

목차

ABSTRACT

1. 서론

2. 초음파 폴리싱 가공기의 개발

3. 실험

4. 실험결과 및 고찰

5. 결론

참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-581-014411746