메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
대한기계학회 Journal of Mechanical Science and Technology Journal of Mechanical Science and Technology Vol.19 No.2
발행연도
2005.2
수록면
649 - 654 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This paper presents fabrication and drive test of a peristaltic PDMS micropump actuated by the thermopneumatic force The micropump consists of the three peristaltic-type actuator chambers with microheaters on the glass substrate and a microchannel connecting the chambers and the inlet/outlet port The micropump is fabricated by the spill-coating process, the two-step curing process, the JSR (negative PR) molding process, and etc The diameter and the thickness of the actuator diaphragm are 2 5 mm and 30 ㎛, respectively The meniscus motion in the capillary tube is observed with a video camera and the flow rate of the micro pump is calculated through the frame analysis of the recorded video data. The maximum flow rate of the micro-pump is about 0.36 μL/ sec at 2 Hz for the zero hydraulic pressure difference when the 3-phase input voltage is 20 V.

목차

Abstract

1. Introduction

2. Structure and Working Principle

3. Fabrication Process

4. Measurement

5. Conclusions

Acknowledgments

References

참고문헌 (6)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-550-014473074