메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
대한기계학회 Journal of Mechanical Science and Technology Journal of Mechanical Science and Technology Vol.19 No.11[Special Edition]
발행연도
2005.11
수록면
2,165 - 2,171 (7page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
We have modeled most errors, which affect the measurement accuracy, with Jone’s matrix. From the simulation, we can characterize the errors and take good aids for selecting components and designing ellipsometer. The traditional residual method has good performance when there are only azimuth angle errors and extinction errors, but it has not good performance when there are other errors. We have proposed the optimal calibration method for overcoming the residual method. The optimal method selects error values to have the least square difference between the measured thickness and the simulated thickness. We can reduce the design variables to three, incident angle error, and azimuth angle errors of polarizer and analyzer. The optimization results are slightly different from the residual method, and have smaller standard deviation of errors than the residual method. The experiment shows good agreement with the simulations.

목차

Abstract

1. Introduction

2. Modeling of Errors

3. Analysis of Errors

4. Optimization Method

5. Conclusions

References

참고문헌 (8)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-550-018231567