메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Investigations to determine the ranges of main parameters responsible for the formation of certain crystal structures have been conducted in the present study. Frost grows on a plate under the following conditions: airflow temperature is 10 ~ 20℃, humidity is 2.64 ~ 9.36 g/㎏, Re number is 7,000 ~ 17,000 and plate temperature is -11.6 ~ -28.4℃. Bare aluminum and lacquer coated surfaces show similar advanced dynamic contact angle, which in present study is 88°. All measurements are accompanied by visual observations. The results are summarized in a form of the frost map. The entire area of tested parameters is divided into regions with different frost crystal structures. Frost has highest thickness when formed on a plate with the temperature below -20℃ from the moist air with absolute humidity within 4.0 ~ 7.0 g/㎏, while most dense frost is observed at humidity smaller than 3.0 g/㎏ and higher than 8.0 g/㎏.

목차

ABSTRACT

1. Introduction

2. Experimental Equipment

3. Results and Discussions

4. Conclusions

References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-553-015421477