메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
대한설비공학회 대한설비공학회 학술발표대회논문집 대한설비공학회 2002년도 하계학술발표회 논문집(Ⅲ)
발행연도
2002.6
수록면
1,508 - 1,513 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Efforts on the development of frost control technique consider the important influences of surface energy on frost crystal structure. The present study is focused on frost map for hydrophilic surface with low advanced dynamic contact angle(ADCA) obtained by plasma treatment. An objective of this study is to determine the effects of main parameters on the formation of frost structures on hydrophilic surface. For each test run airflow parameters are maintained at airflow temperature within the range of 10~20℃, humidity within the range of 2.64~9.36 g/㎏, Re within the range of 7,000~17,000 and plate surface temperature within the range of -11.6~-28.4℃. Total deposition time is 30 minutes, while frost images are taken at 5, 10, 20 and 30 minutes.
The results of investigations are summarized in a form of the frost map. The entire area of tested parameters is divided into regions with different frost crystal structures. It is found that the density of the frost formed on a surface with lower ADCA is higher, than that generated on bare aluminum surface.

목차

ABSTRACT

1. Introduction

2. Experimental Procedure

3. Results and Discussions

4. Conclusions

References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-553-015421497