메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
한국해양공학회 한국해양공학회지 한국해양공학회지 제13권 제3(Ⅰ)호
발행연도
1999.8
수록면
68 - 76 (9page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (11)

초록· 키워드

오류제보하기
The welding residual stresses produced by the welding frequently caused a crack and promote stress corrosion etc. in HAZ(heat affected zone) contained with external load and weakness of material. Therefore, PWHT(post welding heat treatment) is widely used to reduce welding residual stress, to relax hardening of heat affected zone and to get rid of impurity. In this study, in order to define the effect on shapes of T-welded joint, during the post welding heat treatment, we have carried out numerical analyses on the several test pieces by using computer program which was based on thermal-elasto-plasto-creep theories for the study.
The main results obtained from this study is as follows :
1) The mechanical difference for change the thickness of plate and groove angle did not appear.
2) The distribution modes of welding residual stresses are same on the all test specimens during the post welding heat treatment.
3) In a mechanical point of view, minimum groove angle(40°) is more suitable than maximum groove angle(60°).
4) Therefore, it is appropriate to minimize the size of groove shape in strength and safety.

목차

Abstract
1. 서론
2. 크리프열탄소성이론의 유한요소 정식화
3. 해석모델 및 후열처리 조건
4. 고찰
5. 결론
후기
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-559-015497319