지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
초록· 키워드
오류제보하기
The effect of vertical riser support system on the dynamic behaviour of a classical spar platform is investigated. Spar platform generally uses buoyancy-can riser support system, but as water depth gets deeper the alternative riser support system is required due to safety and cost issues. The alternative riser support system is to hang risers off the spar platform using pneumatic cylinders rather than the buoyancy-can. The existing numerical model for hull/mooring/riser coupled dynamics analysis treats riser as an elastic rod truncated at the keel (truncated riser model), thus, in this model, the effect of riser support system can not be modeled correctly. Due to this reason, the truncated riser model tends to overestimate the spar pitch and heave motion. To evaluate more realistic global spar motion, mechanical coupling among risers, guide frames and support cylinders inside of spar moon-pool should be modeled. In the newly developed model, the risers are extended through the moon-pool by using nonlinear finite element methods with realistic boundary condition at multiple guide frames. In the simulation, the vertical tension from pneumatic cylinders is modeled by using ideal-gas equation and the vertical tension from buoyancy-cans is modeled as constant top tension. The different dynamic characteristics between buoyancy-can riser support system and pneumatic riser support system are extensively studied. The alternative riser support system tends to increase spar heave motion and needs damper system to reduce the spar heave motion.
목차
ABSTRACT
1. INTRODUCTION
2. FORMULATION
3. SPECIFICATION OF SPAR PLATFORM
4. DESCRIPTION OF CASE STUDY AND DESIGN ENVIRONMENTAL CONDITION
5. RESULTS AND DISCUSSION
6. CONCLUSION
REFERENCES
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Numerical model of a tensioner system and riser guide
Ocean systems engineering
2013 .01
-
The Effect of Internal Row on Marine Riser Dynamics
한국해안·해양공학회논문집
1995 .03
-
A comparison of coupled and uncoupled dynamic analysis for the flexible riser in shallow water
Journal of Advanced Marine Engineering and Technology (JAMET)
2014 .02
-
The Effect of Internal Flow on Vortex-Induced Vibration of Marine Riser
한국해안·해양공학회논문집
1995 .06
-
다물체계 동역학을 이용한 해양 플랜트의 라이저 인장 장치의 동적 거동 해석
한국CDE학회 학술발표회 논문집
2014 .02
-
Global stabilization of three-dimensional flexible marine risers by boundary control
Ocean systems engineering
2011 .01
-
Boundary control of marine risers with bending couplings
제어로봇시스템학회 국제학술대회 논문집
2012 .10
-
Free Vibration of Marine Riser System with the Inclusion of Internal Flow
한국해안·해양공학회논문집
1996 .12
-
심해 라이저의 와류유기 진동해석
한국해양공학회지
2017 .10
-
심해용 시추 라이저 개발연구
한국생산제조학회 학술발표대회 논문집
2013 .10
-
CFD simulation of vortex-induced vibration of free-standing hybrid riser
Ocean systems engineering
2017 .01
-
A finite element analysis for unbonded flexible risers under bending loads
Ocean systems engineering
2015 .01
-
Analytical and numerical analysis for unbonded flexible risers under axisymmetric loads
Ocean systems engineering
2016 .01
-
CFD prediction of vortex induced vibrations and fatigue assessment for deepwater marine risers
Ocean systems engineering
2016 .01
-
심해 환경 조건에서의 Drilling Riser System 해석
한국전산유체공학회 학술대회논문집
2012 .05
-
압탕 최소화를 위한 터보차저하우징의 융합 S/W 응용 제조기술 및 실험적 검증
한국주조공학회지 (주조)
2017 .01
-
수치해석적 방법을 통한 해양심층수 취수용 유연 라이저의 거동 해석에 관한 연구
한국해양공학회지
2004 .08
-
Dynamic characteristics and fatigue damage prediction of FRP strengthened marine riser
Ocean systems engineering
2018 .01
이 논문의 저자 정보
이 논문과 함께 이용한 논문
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2009-559-015533170