메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
전력전자학회 ICPE(ISPE)논문집 2007년 ICPE논문집
발행연도
2007.10
수록면
310 - 315 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
A new, simple partial discharge (PD) detector for low-voltage rotating electrical machines using acoustical emission (AE) technique is dseveloped in this study. Common electric components were used in the detector, which reduces the cost of inspection, comparing with the traditional PD detection methods that use expensive equipment costing from tens of thousands to several millions dollars. Experimental results by resonant type AE sensors (150 ㎑) which utilize power line-cycle in a microcontroller unit (MCU) as reference to measure the PDs generated in a low-voltage motor are presented. The AE signals are then amplified by a pre-amplifier (30 ㎑ ~ 300 ㎑, 34 ㏈). Since the resonant frequency of the sensor is much lower than that of the electromagnetic (EM) interferences around the motor, the effects of noise is substantially reduced by this method. In the mean time, the use of 150-㎑ resonant type AE sensor also avoids the disturbance of mechanical vibration noise. According to the experiment results, the measurement system developed in this study can be used to detect the PDs’ AE signals correctly. The AE measurement scheme proposed in this study provides an effective, low-cost method for PD measurements.

목차

Abstract
Ⅰ. INTRODUCTION
Ⅱ. MECHANICAL VIBRATION RESPONSE
Ⅲ. PARTIAL DISCHARGE’S AE SIGNAL CONFIRMATION
Ⅳ. SYSTEM CIRCUIT
Ⅴ. EXPERIMENT RESULTS AND DISCUSSION
Ⅵ. CONCLUSION
ACKNOWLEDGMENT
REFERENCE

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-560-016306116