메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
한국동력기계공학회 한국동력기계공학회 학술대회 논문집 2007年度 春季學術大會 論文集
발행연도
2007.6
수록면
162 - 166 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
The effect of different shot peening treatment on the fatigue crack growth behavior of an aluminum alloys has been investigated. The fatigue crack propagation rate of two aluminum alloys were observed to be slightly improved by the compressive residual stresses induced during the shot peening treatment. The fractography observation was performed using a scanning electron microscope on fatigue fracture surface and the striation spacing and size depended on repeated stress level and shot peening velocity. The diffraction pattern of small areas were measured by using the X- ray beam of ф0.2㎜ in the fracture surface. The characteristic X- ray of Cu-K<SUB>α</SUB> and the lattice plane (311) of aluminum alloy were selected to obtain a middle diffraction angle. The changes in X-ray material parameters were described directly related to the process of fatigue until the initiation of fatigue crack and X-ray diffraction pattern ring and pole figure could be explained the failure prediction with stress distribution.

목차

Abstract
1. 서론
2. 시험편 및 실험방법
3. 실험 결과 및 고찰
4. 결론
후기
참고 문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-550-014962776