메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
대한설비공학회 대한설비공학회 학술발표대회논문집 대한설비공학회 2008년도 동계학술발표대회
발행연도
2008.11
수록면
363 - 368 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Nitrogen oxides (NO, NO₂ and N₂O) have been controlled effectively by the SCR catalysts coated on monolith or honeycomb in commercial sites with ammonia as reductant at high temperature range 300~400℃. However, the catalytic filter has much merit on the point of controlling the particles and nitrogen oxides simultaneously. It will be more advanced-system if the catalytic working temperature is reduced to the normal filtration temperature of under 200℃. This study has focus on the development of the catalytic filter working at the low temperature. So the additive effect of the components such as Pt and Mn (which are known the catalytic component of V₂O5/TiO₂ was investigated. The V₂O?-WO₃ catalytic filter exhibited high activity and selectivity at 250~320℃ showing more than 95% NO conversion for the treatment of 600 ppm NO at face velocity 2 cm/s. The Pt-V₂O?-WO₃ catalytic filter shifted the optimum working temperature towards the lower temperature (170~200℃). And NO conversion was 100% and higher than that of V₂O?-WO₃ catalyst at 250~320℃. The MnOX-V₂O?-WO₃ catalytic filter showed the wide temperature range of 220~330℃ for more than 95% NO conversion. This is a remarkable advantage when considered the MnOX catalytic filter presents the maximum activity at 150~250℃ and V₂O?-WO₃ catalytic filter shows the maximum activity at 250~320℃.

목차

ABSTRACT
1. 서론
2. 재료 및 방법
3. 결과 및 분석
4. 결론
후기
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-553-018540146