메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
장정환 (부산대학교) 권원희 문영훈 (부산대학교)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2009년도 추계학술대회 강연 및 논문 초록집
발행연도
2009.11
수록면
1,173 - 1,178 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Studies on the forming characteristics by a rotary swaging process using the sub-scale specimens have been carried out to obtain a shell body nose of desirable quality. This paper aimed to analyze whether the diameter reduction of the products were reduced until 50% by forming, the size of products were satisfied and the defects were happened. For the analysis of formability of the shell body nose using rotary swaging process, finite element method (FEM) has been used for the process analysis. From the FE results, the desirable dimensions is satisfied to 2.61~2.95㎜ of the nose thickness. From these experimental results using the perform specimen, it is found that the process variables affect the quality of the tube such as the dimensional precision, hardness and increment of thickness of the product. As the results, the thickness of the product increased about 45% at the maximum thickness of the nose area. Cracks can occur on the inner surface at the diameter reduction more than 50%. The cause is predicted due to the deformation increase by increase of metal flow for inner direction.

목차

Abstract
1. 서론
2. 시험방법
3. 결과 및 고찰
4. 결론
후기
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-550-019125157