메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
김대정 (성균관대학교) 용석주 (성균관대학교) 정성훈 (성균관대학교) 이영제 (성균관대학교) 김일규 (한전원자력연료주식회사)
저널정보
한국트라이볼로지학회 한국트라이볼로지학회 학술대회 한국윤활학회 학술대회 제36권
발행연도
2003.6
수록면
279 - 285 (7page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Fretting is the small-amplitude oscillatory motion, usually tangential, between two solid surfaces in contact. fretting wear is wear arising as a result of fretting. In nuclear power plant, high flow rates can induce vibration of the nuclear fuel rod cladding tubes resulting in fretting wear damage due to contacts between the tubes and their supports. In this paper the sliding wear' tests and fretting wear tests were performed in water at room temperature. Sliding tests with the pin-on-disk type tribometer were done using nuclear fuel rod cladding tube materials of Zirconium and Zircaloy-4 alloy series against STS 304 under various applied loads. Fretting tests were done using some different tube materials and supporting grid shapes under various applied loads. From the results of sliding and fretting wear tests, the wear of tube materials can be predictable by obtaining wear coefficient using the work rate model. Depending on various normal load, tube materials, and supporting grid shapes, distinctively different wear scars of fretting and stick-slip mechanism can occur.

목차

Abstract
1. 서론
2. 실험장치 및 실험조건
3. 실험결과 및 고찰
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2010-551-002178377