메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
한천구 (청주대학교) 박재순 (청주대학교)
저널정보
대한건축학회 대한건축학회 논문집 - 구조계 大韓建築學會論文集 構造系 第26卷 第6號
발행연도
2010.6
수록면
37 - 44 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This paper is to imvestigate experimentally the effect of change in surface coating material remover and number of use of the aluminum form affecting the surface quality of the concrete. Though the surface quality of concrete shows the trend of deterioration based on the visual observation as the number of use increases, the case of Polyamide (Referred to as PA hereafter) and Teflon (Referred to as Thereafter) resin coating shows minimal change on surface quality even when the number of use increases compared to the non-coated Aluminum (Referred to as AL hereafter) and Poly Ethylene (Referred to as PE hereafter) resin coating. For the surface roughness, the case of AL showed defective from the 1st use and showed a high value irrelevant from the use of remover. The case of PE showed better surface roughness than AL, and when the remover was used, the surface roughness showed lower for first time and increased as the number of use increased irrelevant from the remover material. Also PA and T showed very small surface roughness than those of AL and PE. While PA showed small difference from the use of remover, T improved by using the remover. The effect on number of pores on the concrete surface was the biggest at 0.1∼1 ㎜, and while the number of generated pores decreased when applying the remover to AL and PE, it significantly decreased for PA and T when the remover was not used.

목차

Abstract
1. 서론
2. 실험계획 및 방법
3. 실험결과 및 분석
4. 결론
참고문헌

참고문헌 (3)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2010-540-002449545