메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
문성인 (성균관대학교) 김윤재 (성균관대학교) 김영진 (성균관대학교) 박윤원 (한국원자력안전기술원) 송명호 (한국원자력안전기술원) 이진호 (한국원자력안전기술원)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2002년도 제1회 재료 및 파괴부문 학술대회 논문집
발행연도
2002.3
수록면
87 - 93 (7page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (5)

초록· 키워드

오류제보하기
It is commonly required that steam generator tubes wall-thinned in excess of 40% should be plugged. However, the plugging criteria are known to be too conservative for some locations and types of defects and its application is confined to a single crack. In the previous study, a crack coalescence model applicable to steam generator tubes with two collinear axial through-wall cracks was proposed and a coalescence evaluation diagram was developed which can be used to determine whether the adjacent cracks detected by NDE coalesce or not. In this paper, a total of 9 local failure models including flow stress model, necking base model, stress base model, reaction force model and plastic zone contact model were introduced to determine the optimum local failure model. Plastic collapse tests and FEA using the plate with two collinear through-wall cracks were performed for the selection of the optimum local failure model. By comparing the test results with the prediction results obtained from local failure models, reaction model and plastic zone contact model were determined as the optimum local failure models.

목차

Abstract
1. 서론
2. 축방향 다중관통균열의 합체모델
3. 평판에 대한 소성붕괴시험
4. 국부파손 예측모델
5. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2010-550-003027672