메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
임종윤 (한국ESI) 이창수 (화승R&A) 김도형 (화승R&A) 주현승 (강원대학교) 김헌영 (강원대학교)
저널정보
한국자동차공학회 한국자동차공학회 춘계학술대회 2009 KSAE 부문종합 학술대회
발행연도
2009.4
수록면
1,175 - 1,180 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Weather strips in automotives protect not only wind, dust and water leakage but also noise from exterior environment. Weather strips are suitable to reduce noise from high frequency range over 1 ㎑. Because seals of weather strips have too many resonant modes in this frequency region, SEA approach is better candidate than general FEM/BEM approaches. With deformed geometries from non-linear deformation analysis using FEM, SEA structural subsystems according to thicknesses were modeled. Also several internal cavities between seals as well as source and receiver cavities were modeled as SEA acoustic subsystems. The results from acoustic response of receiver cavity were compared with test. Good agreements between analysis and test were reached in frequency range over 1.6 ㎑ or 1 ㎑. Although it is difficult to apply this SEA approach to geometry change in detail, acoustic performance can be predicted according to types, thicknesses, materials and clear change of geometry.

목차

Abstract
1. 서론
2. 변형량 해석 및 SEA 모델링
3. SEA 해석
4. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2010-556-002789306