지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- Korean Society for Precision Engineering Journal of the Korean Society for Precision Engineering 한국정밀공학회지 Vol.28 No.9
- 발행연도
- 2011.9
- 수록면
- 1,086 - 1,093 (8page)
이용수
이 논문의 연구 히스토리 (2)
- 이 논문의 후속연구가 궁금하신가요?
- 연관 학술논문 또는 학술발표를 통해 보다 발전된 연구결과를 확인하실 수 있습니다.
- 이 논문의 연구 히스토리 확인하기
초록· 키워드
오류제보하기
To fabricate the aluminum alloys with good drawability, the textures evolution of the AA5182 sheets due to the change of l/d parameter after rolling and subsequent annealing was studied. The measurement of the deformation textures was carried out for the sheets with high reduction ratio and the change of the recrystallization texture was investigated after heat-treatments of the rolled sheets in various l/d parameters. Rolling without lubrication and subsequent annealing led to the formation of favorable rot-CND {001}〈110〉 and γ-fiber ND//〈111〉 textures in AA5182 sheets. From the results, the γ-fiber ND//〈111〉 component well evolved during rolling at high l/d parameter of 6.77. The initial shear deformation texture, especially, γ-fiber ND//〈111〉 was not rotated during heat treatment in holding time of 180~7,200 seconds on AA5182 with l/d parameter of 6.77. Therefore, the AA5182 sheets were fabricated by controlling l/d parameter having well evolved γ-fiber ND//〈111〉 which was advantageous in good drawability of the sheets.
목차
1. 서론
2. 실험 방법
3. 실험결과 및 고찰
4. 결론
참고문헌
참고문헌 (5)
참고문헌 신청
Kamijo, T. / 1993 / Formation for(001)Deformation Structure inAluminum Single Crystals of an S-Orientation / ActaMater 41(3):975~990
K. J. KIM / 2005 / PLASTIC STRAIN RATIOS AND PLANAR ANIOSOTROPY OF AA5182/POLYPROPYLENE/AA5182 SANDWICH SHEETS / International Journal of Automotive Technology 6(3):259~268
Lequeu, Ph / 1998 / Modeling of the PlasticAnisotropy of Textured Sheet / Metall. Trans. A 19(1):105~120
Um, K. K / 2000 / Effect of Initial Sheet Thickness on ShearDeformation in Ferritic Rolling of IF-Steel Sheets / ISIJ Int 40(1):58~64
김기주 / 2009 / Development of Application Technique of Aluminum Sandwich Sheets for Automotive Hood / International Journal of Precision Engineering and Manufacturing 10(4):71~75
K. J. KIM / 2005 / PLASTIC STRAIN RATIOS AND PLANAR ANIOSOTROPY OF AA5182/POLYPROPYLENE/AA5182 SANDWICH SHEETS / International Journal of Automotive Technology 6(3):259~268
Lequeu, Ph / 1998 / Modeling of the PlasticAnisotropy of Textured Sheet / Metall. Trans. A 19(1):105~120
Um, K. K / 2000 / Effect of Initial Sheet Thickness on ShearDeformation in Ferritic Rolling of IF-Steel Sheets / ISIJ Int 40(1):58~64
김기주 / 2009 / Development of Application Technique of Aluminum Sandwich Sheets for Automotive Hood / International Journal of Precision Engineering and Manufacturing 10(4):71~75
이 논문의 저자 정보
이 논문과 함께 이용한 논문
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2013-555-000313594