메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
유영찬 (한국건설기술연구원) 김준희 (한국건설기술연구원) 김호룡 (한국건설기술연구원) 최기선 (한국건설기술연구원)
저널정보
대한건축학회 대한건축학회 논문집 - 구조계 大韓建築學會論文集 構造系 第27卷 第11號
발행연도
2011.11
수록면
61 - 70 (10page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This paper describes a full-scale experimental program to investigate the structural behavior of insulated concrete sandwich wall panels (SWPs). Main test variables are types of insulation and the number of glass fiber reinforced polymer (GFRP) shear grids. Expanded polystyrene (EPS) and extruded polystyrene (XPS) with the same thickness of 100 ㎜ and Vacuum Insulation panel(VIP) with the thickness of 60 ㎜ are used to satisfy the building insulation requirement in Korea. Various number of GFRP shear grids are used to examine the degree of composite action of two concrete wythes. Each test result is compared with a fully-composite wall panel specimen, which has solid concrete core between concrete wythes. Fifteen SWPs were tested under displacement control subjected to four point concentrated loads. According to the test results, the specimens with EPS exhibit an enhanced load-displacement behavior in comparison with the specimens with XPS because of the relatively high surface roughness of EPS form. Most of specimen failed in the loss of shear-frictional capacity between concrete and insulation followed by rupture of GFRP shear grids. The specimen reinforced with four GFRP shear grids along the shear spans, however, exhibited a full composite behavior up to flexural failure. Based on the test results, the SWPs reinforced with GFRP grids as shear connectors hold an enhanced flexural capacity by developing a high degree of composite action.

목차

Abstract
1. 서론
2. 문헌 고찰
3. 유리 섬유복합체(GFRP) 그리드형 전단연결재
4. 실험 계획
5. 실험 결과 및 분석
6. 결론
감사의 글
참고문헌

참고문헌 (12)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2013-540-001053543