메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
양해준 (충남대학교) 이영오 (코네스코퍼레이션) 박상혁 (계룡건설) 윤현도 (충남대학교)
저널정보
대한건축학회 대한건축학회 논문집 - 구조계 大韓建築學會論文集 構造系 第27卷 第12號
발행연도
2011.12
수록면
75 - 82 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (4)

초록· 키워드

오류제보하기
This paper provides the flexural test results of concrete prisms with a layer of expansive strain hardening cement-based composite(SHCC) in the tension zone. The objective of this study is to evaluate the effect of the layer thickness(30 and 40㎜), SHCC strengths(30, 70 and 100㎫) and SHCC types(conventional and expansive SHCC) on the flexural performance and cracking behavior of SHCC-layered concrete prisms. Both conventional and expansive SHCC materials were reinforced with hybrid 0.75% polyethylene(PE) and 0.75% steel fibers in volume fraction. In expansive SHCC, 10% of cement amount were replaced with calcium sulfo aluminate(CSA) expansive admixture(EXA). The concrete beams were loaded in static four-point bending using a universal testing machine with 0.75 ㎜/min of strain rate. Test results of SHCC materials indicate that the replacement of EXA leads to significant improvement for the compressive and flexural strength of 30 and 70㎫ SHCC materials. From test results of SHCC-layered beams, It is found that concrete beams with a layer of 30 and 70㎫ expansive SHCC showed higher flexural strength than concrete beams with a conventional SHCC layer.

목차

Abstract
1. 서론
2. 실험
3. SHCC 역학적 특성
4. SHCC로 휨 보강된 콘크리트 보의 휨 성능
5. SHCC로 휨 보강된 콘크리트 보의 휨내력 평가
6. 결론
참고문헌

참고문헌 (5)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2013-540-001387557