지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- Korean Society for Precision Engineering Journal of the Korean Society for Precision Engineering 한국정밀공학회지 Vol.29 No.4
- 발행연도
- 2012.4
- 수록면
- 409 - 416 (8page)
이용수
초록· 키워드
오류제보하기
Recently, surface modification technology is of importance to improve the wear resistance and the corrosive resistance for high accurate mechanical parts such as LM guide, Ball Screw and Roller Bearing etc., Those has generally featured on rolling contact mechanism to improve not only the wear and the friction, but also the accuracy and the corrosion performances. For surface modifications of high accurate mechanical parts, normally thermal spray, PVD, CVD and E.P. processes have been used with many materials such as DLC, raydent, W, Ni, Ti etc. Diamondlike carbon (DLC) films possess a combination of attractive properties and have been largely employed to modify the tribological behaviors such as friction, wear, corrosion, fretting fatigue, biocompatibility, etc. However, for rolling contact mechanism mechanical parts DLC films are needed to study for commercial benefit. Rolling contact mechanism has features on effects of cyclic motions and stresses, and also not simply sliding motions. The papers focused on the performance test of wear and corrosive resistance according to Me-DLC film thickness. And also, its thickness effect of wear analysis was carried out through the simulation of the maximum shear stress under the rolling contact surface. As the results, Me-DLC films have more potential to improve the wear resistance for high precision mechanical parts than raydent films.
목차
1. 서론
2. 구름 운동의 응력분포 및 내마모 이론
3. 실험장치 및 조건
4. 내마모성 및 내식성 평가
5 코팅 전후 정밀도 성능평가
6. 결론
후기
참고문헌
참고문헌 (20)
참고문헌 신청
Stewart, S. / 2002 / Rolling contact fatigue of surface coatings-a review / Wear 253(11):1132~1144
Farley, J. / 2010 / Low cycle fatigue simulation and fatigue life prediction of multilayer coated surfaces / Wear 269(9):639~646
Wang, Y. / 1999 / Rolling contact fatigue failure modes of lubricated silicon nitride in relation to ring crack defects / Wear 225:1284~1292
Klaffke, D. / 2005 / Influences on the tribological behaviour of sliprolling DLC-coatings / Wear 259(1):752~758
Manier, C. A. / 2010 / Benchmark of thin film coatings for lubricated slip-rolling contacts / Wear 268(11):1442~1454
Farley, J. / 2010 / Low cycle fatigue simulation and fatigue life prediction of multilayer coated surfaces / Wear 269(9):639~646
Wang, Y. / 1999 / Rolling contact fatigue failure modes of lubricated silicon nitride in relation to ring crack defects / Wear 225:1284~1292
Klaffke, D. / 2005 / Influences on the tribological behaviour of sliprolling DLC-coatings / Wear 259(1):752~758
Manier, C. A. / 2010 / Benchmark of thin film coatings for lubricated slip-rolling contacts / Wear 268(11):1442~1454
이 논문의 저자 정보
이 논문과 함께 이용한 논문
경질 박막을 코팅한 H13 열처리재의 내마모성
김경현
,
이규용
대한기계학회 춘추학술대회
2006
.04
SUJ2강의 Cr(C,N) 코팅층의 마찰특성 평가
박경모
,
이강식
,
김기수
외 1명
대한용접학회 특별강연 및 학술발표대회 개요집
2016
.04
내마모 합금주강 소재를 적용한 고수명 착탈식 베어링 부품 개발
탁윤학
,
박동환
,
이미란
외 3명
한국생산제조학회 학술발표대회 논문집
2015
.10
Thermal Diffusion Process을 이용한 SUJ2 소재의 VC 코팅층에 관한 연구
손석원
,
조균택
,
유광춘
외 1명
한국표면공학회 학술발표회 초록집
2012
.11
TRD 기반 2단 표면 처리법을 통해 JIS-SUJ2 표면에생성된 Nb(C,N)코팅층 성장 거동 연구
이경훈
,
강남현
,
김기수
외 1명
한국표면공학회 학술발표회 초록집
2015
.05
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2013-555-001657524