메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
서창민 (경북대학교) 안영동 (경북대학교) 서민수 (국민대학교) 편영식 (선문대학교)
저널정보
한국해양환경·에너지학회 한국해양환경·에너지학회 학술대회논문집 2012년도 한국해양과학기술협의회 공동학술대회
발행연도
2012.5
수록면
1,649 - 1,652 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
STB2 of bearing steel is used far roller bearing and ball bearing due to their high wear resistance and impact resistance. Among many useful surface strengthening technologies, ultrasonic nanocrystal surface modification (UNSM) technology is promising for increasing fatigue strength and wear resistance, and reducing friction as well The main idea to apply UNSM technology for improving both bending fatigue strength and rolling contact fatigue strength, of slim bearing rings is applying not only raceway but also the opposite side of the raceway - in other words, outer side of the outer ring and inner side of the inner ring. The test specimens for the rotary bending fatigue test were made of STB2 bearing steel and treated by the UNSM technology. In Ms study, fatigue result that was subjected to different loads of the UNSM treatment was investigated and compared with that of the untreated specimen. The microhardness of the UNSM-treated specimens increased by about 20%, higher than that of the untreated specimens. The X-ray diffraction analysis showed that a compressive residual stress of more than 1,000 MPa was induced after the UNSM treatment Also, electron backscatter diffraction analysis was used to study the surface structure and nanograin refinement. The results showed that the rotary bending fatigue life and fatigue strength of the UNSM-treated specimens increased by about 80% and 31%, respectively, compared to those of the untreated specimen. These results might be attributed to the increased micrchardness, the induced compressive residual stress, and the nanocrystal structure modification after the UNSM treatment In addition, the fracture surface analysis showed that the fish eye crack initiation phenomenon was observed after the UNSM treatment

목차

ABSTRACT
1. Introduction
2. Experimental method and specimen
3. Results and discussion
4. Conclusion
Acknowledgement
5. Reference

참고문헌 (0)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2013-472-003622950