메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
이현종 (부산대학교) 주병돈 (부산대학교) 박성필 (현대 하이스코) 문영훈 (부산대학교)
저널정보
한국소성·가공학회 한국소성가공학회 학술대회 논문집 2010년도 한국소성가공학회 춘계학술대회 논문집
발행연도
2010.5
수록면
203 - 206 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Hot stamping is possible to combine forming and quenching in one process step. This affords the opportunity to manufacture components with complex geometric shapes and high strength. In this study, characteristics of boron steel which is usually using hot stamping process were analyzed. To estimate high temperature properties, hardening test was performed at 900℃ of heating temperature and held for 10minutes, respectively. And then, specimens were given pressure at 700℃. Martensite was observed and Vickers hardness is approximately 450~470HV. The tensile test of press hardened specimens was performed. The tensile strength is more than l500㎫ and elongation is approximately 8%. And also high cycle fatigue test was performed to prove reliability of hot stamping steel and 60 ㎏/㎟ grade hot rolled steel. Experiment were performed until 10? cycles at stress ratio, R=0. High cycle fatigue test was measured from 80% of tensile strength. Fatigue limit of hot stamping steel and hot rolled steel was approximately 460㎫, 370㎫ at peak stress.

목차

Abstract
1. 서론
2. 실험소재 및 방법
3. 결과 및 고찰
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2014-550-002335335