메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
박윤우 (한국전자통신연구원) 문석환 (한국전자통신연구원) 박기성 (지피) 박준희 (지피)
저널정보
대한설비공학회 대한설비공학회 학술발표대회논문집 대한설비공학회 2015년도 하계학술발표대회
발행연도
2015.6
수록면
882 - 885 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Unlike a conventional photo-voltaic module the developed concentrating photo-voltaic(CPV) module with a light guide can reduce the total thickness of the module. However since the CPV has a problem of high heat flux the center column with four solar cells on each face of it an effective heat dissipation solution is needed. In the present study, the cooling solution with heat pipe was considered and its thermal effectiveness was confirmed by simulation. Through the simulation it was confirmed that the cooling solution with heat pipe can decrease about 20℃ of junction temperature. In the mean time, the experimental test was performed to investigate the thermal performance of the pressed and bent heat pipe. The heat pipe has height of 3.81mm by pressing original diameter of 5mm and curvature radius of 11mm by bent. Through the results, it was also confirmed that there is no any performance decreasing by bent and pressing. In the future, the cooling solution with heat pipe will be optimized according to the design of the CPV module.

목차

ABSTRACT
1. 서론
2. 도광판 냉각구조 및 열해석
3. 냉각소자 제작 및 성능평가
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2016-553-001572855