메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
송정기 (서강대학교) 이재설 (서강대학교) 이정철 (서강대학교)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 창립 70주년 기념 학술대회
발행연도
2015.11
수록면
613 - 616 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This paper reports fabrication of sub-20 ㎚ hydrogel microcantilevers based on replica molding and O2 plasma ashing and their comparable imaging capability with silicon counterparts. First, hydrogel microcantilevers were fabricated with poly(ethylene glycol) diacrylate (PEGDA) using a polydimethylsiloxane (PDMS) cantilever mold via UV crosslinking along with capillary force induced filling into the mold. Second, Pyramid mold was integrated to the free-end of the hydrogel microcantilevers. PEGDA was dispensed into the pyramid mold, bi-axially compressed for 10~20% strain, aligned with the tipless hydrogel microcantilever, and UV cured. Third, tip radius of hydrogel microcantilevers was improved to be sub-20 ㎚ by O2 plasma ashing. Tip radius decrease depending on initial tip radius was characterized by varying the time for plasma ashing. Finally, topography of anodized aluminum oxide (AAO) (width 50 ㎛, depth 2 ㎛) was imaged in non-contact (NC) mode. Sharp hydrogel tip is shown to be free of degradation while imaging in NC mode.

목차

Abstract
1. 서론
2. 제작 공정
3. AAO 기판 이미징
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2016-550-002190814