메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
정찬호 (중앙대학교) 최창경 (Michigan Technological University) 이정호 (한국기계연구원) 이성혁 (중앙대학교)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 창립 70주년 기념 학술대회
발행연도
2015.11
수록면
887 - 890 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The main aim of this study is to investigate the heat transfer characteristics and frosting phenomenon affected by the surface wettability on the low temperature surface. Two different copper surfaces – bare and polymer coated nano structured - were prepared for the experiments. Their static contact angles were 74˚ and 154˚, respectively. The temperature of the copper substrate was measured by using RTD, embedded inside small holes drilled at 1 ㎜ underneath the surface. During the phase change, the temperature of copper sample was remained in the -7.8±0.6 ℃ and the ambient temperature was set as 24±0.5 with the relative humidity 65±1%. Film condensation takes place because of high wettability of the bare copper surface. Frost crystals are immediately generated on the frozen condensate and grow in the vertical direction. On the other hand, dropwise condensates formed on the nano-structured copper surface remain as the supercooled liquid phase. After droplet freezes, frosting is triggered and propagates until covering the whole surface. The frosting is delayed on the superhydrophobic copper surface due to the lower surface free energy. Moreover, it was found that the heat flux from hydrophobic surface was higher than the case of hydrophilic surface in the same working conditions.

목차

Abstract
1. 서론
2. 실험 방법
3. 결과 및 논의
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2016-550-002188529