메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
이재환 (한양대학교) 정해준 (한양대학교) 김강율 (한양대학교) 이관수 (한양대학교)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2018년도 학술대회
발행연도
2018.12
수록면
637 - 641 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
When the frost layer grows under the extra-low cooling surface temperature, the phase change appears as a desublimation rather than freezing after condensation. However, the previous frosting models were established under the conditions favorable for freezing after condensation. The purpose of this study is to propose the frosting model based on the commercial software (Ansys fluent). The proposed model can predicts the growth behavior of frost layer under the conditions favorable for desublimation. In the numerical model, new mass transfer rate which can consider the water penetration into the frost layer was developed. The model was validated by experimental results at a cooling surface temperature of -40°C or less, where desublimation occurs predominantly. The frosting model predicts the growth of frost thickness and density within the maximum error of 15%. Furthermore, the frost layer growth was visualized using the frosting model.

목차

Abstract
1. 서론
2. 수치 모델
3. 수치 해석 방법 및 검증
4. 서리층 성장 과정 관찰
5. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0