메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
권혁우 (국민대학교) 정영중 (국민대학교) 김누리 (국민대학교) 김용석 (국민대학교)
저널정보
한국소성·가공학회 한국소성가공학회 학술대회 논문집 2013년도 한국소성가공학회 추계학술대회 논문집
발행연도
2013.10
수록면
209 - 212 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (3)

초록· 키워드

오류제보하기
Galling is the most frequently observed tribological phenomena during sheet metal forming, which is associated with adhesion (stiction) and transferring of a metallic particle from softer sheet metal to harder tool surface. In this study, tribological characteristics during sliding of STD-61 tool steel against AZ31B magnesium alloy were examined to find out galling mechanism of AZ31B magnesium alloy-tool steel tribopair at different loads and temperatures. Flat surface-on-disk reciprocating tests were carried out at various applied loads under both dry and lubricated condition at room temperature and 250 ℃. Galling of the AZ31B magnesium alloy was evaluated by measuring friction force (friction coefficient), surface roughness and observing slid surfaces of both Mg alloy and tool steel by OM and SEM. The results showed that number of asperity junctions formed between the two surfaces increased rapidly as temperature and applied load increase. Severe plastic deformation was observed at the slid surface of the AZ31B magnesium alloy sheet.

목차

Abstract
1. 서론
2. 실험방법
3. 실험결과
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2017-551-000831211