메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
박동환 (Gyeongbuk Hybrid Technology Institute) 윤재정 (Gyeongbuk Hybrid Technology Institute) 문현덕 (Joil) 이태길 (Joil)
저널정보
한국생산제조학회 한국생산제조학회지 한국생산제조학회지 Vol.26 No.1
발행연도
2017.2
수록면
59 - 65 (7page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
A seat track product is a car seat part that provides a base for vehicle seats. An ultra–high strength steel sheet is used to reduce the weight of vehicle body parts. However, the formability of an ultra–high strength steel sheet is poor because of its very low elongation and very high elastic deformation. For this reason, a new forming technology of an ultra-high strength steel sheet is required. The influence of spring-back of seat track parts on the shape freeze in forming processes was investigated to be solved by adjusting the appropriate tool design such as minus clearance between punch and die, and punch angle. This paper describes how to apply the spring-back prevention technique for improving shape freeze by using the ultra-high strength steel sheet with 980MPa to develop lightweight seat tract parts.

목차

ABSTRACT
1. 서론
2. 소재 물성 시험
3. 성형 해석
4. 사전 검증용 금형 제작
5. 시트 트랙 시작 금형 제작
6. 시트 트랙 제품 평가
7. 결론
References

참고문헌 (11)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2017-003-002310325