지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 대한전기학회 Journal of Electrical Engineering & Technology Journal of Electrical Engineering & Technology Vol.12 No.2
- 발행연도
- 2017.3
- 수록면
- 846 - 851 (6page)
이용수
초록· 키워드
오류제보하기
Piezoelectricity is the capability of a piezoelectric material to change mechanical energy into electrical energy. The determination of electrical and mechanical properties plays a significant role in characterizing the piezoelectric material. The energy losses characteristics of piezoelectric material can be described by mechanical quality factor. In this paper, the output voltage and mechanical quality factor of Lead Zirconate Titanate (PZT-4A) piezoelectric material is determined under various resistance and loading conditions by using the test setup. The commercial FEM software ABAQUS is used to analyze the performance of piezoelectric material under static loading conditions. It is observed that these properties affect the performance of a material particularly in the designing of smart structures. The experimental results are partially compared to the simulation values.
목차
Abstract
1. Introduction
2. Historical Background
3. Experimental Setup
4. Results and Discussion
5. Conclusions
References
참고문헌 (24)
참고문헌 신청
K. Cook-Chennault, N. Thambi and A. Sastry, Powering MEMS portable devices ? a review of non-regenerative and regenerative power supply systems with special emphasis on piezoelectric energy harvesting systems. Smart Materials and Structures, 2008. 17(4): p. 043001.
A. Safari and E.K. Akdogan, Piezoelectric and acoustic materials for transducer applications. Springer Science & Business Media, 2008.
J. Latalski, Modelling of macro fiber composite piezoelectric active elements in ABAQUS system. Eksploatacja i Niezawodnosc-Maintenance and Reliability, 2011 (4): p. 72-78.
N. Paliwal, N. Mukhija and D. Bhatia, Design and optimization of high quality factor MEMS piezoelectric resonator with pseudo electrodes.in Reliability, Infocom Technologies and Optimization (ICRITO) (Trends and Future Directions), 2015 4th International Conference on. 2015. IEEE.
X. Chen, T. Yang. W. Wang and X. Yao, Vibration energy harvesting with a clamped piezoelectric circular diaphragm. Ceramics International, 2012. 38: p. S271-S274.
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
매개변수 평가법을 이용한 압전재료의 재료물성 최적화 연구 Part I. 다결정 PZT 세라믹스
전기전자재료학회논문지
2022 .09
-
Influence of polled direction on the stress distribution in piezoelectric materials
Structural engineering and mechanics : An international journal
2015 .01
-
Stretchable Piezoelectric Energy Harvester
대한기계학회 춘추학술대회
2021 .11
-
Electrical Modeling of Piezoelectric Elements and Efficient Driving Method
전력전자학회 학술대회 논문집
2015 .07
-
The influence of initial stresses on energy release rate and total electro-mechanical potential energy for penny-shaped interface cracks in PZT/Elastic/PZT sandwich circular plate-disc
Smart structures and systems
2018 .01
-
Preparation of Highly (002) Oriented Ti Films on a Floating Si (100) Substrate by RF Magnetron Sputtering
Electronic Materials Letters
2020 .01
-
The influence of the initial stresses on Lamb wave dispersion in pre-stressed PZT/Metal/PZT sandwich plates
Structural Engineering and Mechanics, An Int＇l Journal
2016 .01
-
Characterizing Barium Titanate Piezoelectric Material Using the Finite Element Method
Transactions on Electrical and Electronic Materials
2017 .06
-
Development of Powder Injection Molding Process for a Piezoelectric PAN-PZT Ceramics
한국분말야금학회지
2016 .01
-
The influence of initial stresses on energy release rate and total electro-mechanical potential energy for penny-shaped interface cracks in PZT/Elastic/PZT sandwich circular plate-disc
Smart Structures and Systems, An International Journal
2018 .01
-
The influence of the initial stresses on Lamb wave dispersion in pre-stressed PZT/Metal/PZT sandwich plates
Structural engineering and mechanics : An international journal
2016 .01
-
자석을 이용한 압전 에너지 하베스팅 연구
한국소음진동공학회 학술대회논문집
2015 .04
-
Performance Evaluation of Repairing Material for Concrete Crack using Piezoelectric Sensor
대한토목학회 학술대회
2017 .10
-
Design and Development of Piezoelectric Polymer Nanofibers via Electrospinning for Mechanical Energy Harvesting Applications
한국정밀공학회 학술발표대회 논문집
2021 .11
-
유기-무기 하이브리드 압전 나노복합체 기반의 플렉서블 에너지 하베스터 제작 및 발전성능 평가
한국재료학회지
2019 .01
-
Flow-induced-vibration-Based Piezoelectric D-shape Beam Wind Energy Harvesters
한국소음진동공학회 학술대회논문집
2016 .10
-
The influence of the coupling effect of physical-mechanical fields on the forced vibration of the hydro-piezoelectric system consisting of a PZT layer and a viscous fluid with finite depth
Structural Engineering and Mechanics, An Int＇l Journal
2023 .01
-
재료물성에 따른 압전 액추에이터 신호특성분석
한국생산제조학회 학술발표대회 논문집
2019 .05
-
압전 단결정을 이용한 고감도 광대역 링 트랜스듀서의 수중 음향특성 분석
한국소음진동공학회논문집
2022 .08
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2017-560-002172767