메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
이종윤 (충남대학교) 김병수 (충남대학교)
저널정보
한국전산유체공학회 한국전산유체공학회지 한국전산유체공학회지 제22권 제3호
발행연도
2017.9
수록면
54 - 59 (6page)
DOI
10.6112/kscfe.2017.22.3.054

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
In this research it is assumed that the geometry modeled in the CAD system is transferred to the grid generation program in the STL data format, and then surface meshing follows. However, there is a problem that the curvature of the original shape is lost in this process of geometry transfer in the STL data format. In order to solve this problem, a study on approximate curvature recovery of the surface mesh for 3D flow field calculation is pursued. The approximate curvature recovery of the surface grid is performed by firstly finding connectivity between cells, and then performing Along-Edge curvature recovery to obtain curvature recovery along the edge, and lastly calculating Cross-Edge slope continuity after which slope-continuity, that is C1-continuity, between neighboring cells is recovered. In order to verify the improvement of geometry and validity of generated surface grid, a sphere, an ellipsoid, and a wing shape were analyzed by using a Panel code, and it was confirmed that the generated surface grid is close enough to the original shape.

목차

1. 서론
2. 이론적 배경
3. 프로그램
4. 표면격자의 검증
5. 결론
References

참고문헌 (5)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2018-559-001351803