메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
김대윤 (중앙대학교) 이성혁 (중앙대학교)
저널정보
대한설비공학회 대한설비공학회 학술발표대회논문집 대한설비공학회 2017년도 동계학술발표대회 논문집
발행연도
2017.11
수록면
1 - 4 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (3)

초록· 키워드

오류제보하기
The present study aims to experimentally investigate the heat transfer characteristics of a droplet during evaporation on the heated oxi-nitrided surfaces which have been widely used for anti-corrosion applications. However, the thermal resistance of oxi-nitrided surface may be enhanced because of the generation of chemical compound layer. Therefore, the heat transfer coefficient of oxi-nitriding surface is required to be estimated through experiments to compare with that of bare surface. Droplet images were captured by the CMOS camera during evaporation with considering the variation of surface characteristics and temperature. The surface temperature varied from 40℃ to 80℃, below the boiling temperature of water. From the results, the droplet behavior on oxi-nitriding surfaces during evaporation showed similar tendency to that on bare surface. As expected, the total evaporation time was delayed due to the compound layer interfering with heat transfer, but the inhibited effect was insignificant. In addition, the maximum relative deviation of heat transfer coefficient between the oxi-nitriding and bare surfaces were up to 10% with an increase in the surface temperature.

목차

Abstract
1. 서론
2. 실험
3. 결과 및 논의
4. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2018-553-001582766