메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
정재영 (경북대학교)
저널정보
대한용접·접합학회 대한용접·접합학회지 大韓熔接·接合學會誌 第35卷 第6號
발행연도
2017.12
수록면
42 - 50 (9page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this study, we investigated the mechanical properties of new 420 stainless steel strips as a function of nitrogen content and cold rolling reduction. Also, the results of the tensile and thermal fatigue tests using electroslag cladding specimens under a given welding condition were as follows. As-welded structures in which the delta ferrite is present in the form of a mesh are obtained in the alloy composition range in which about 5% delta ferrite is present in the Schaeffler diagram based on Cr equivalent and Ni equivalent. The softening temperature of new 420 stainless steel alloy designed as a mesh as-welded structure was determined to be 680-730℃ as a result of using cold rolled steel at 10-90% reduction. The ratio of 600℃ to room temperature tensile yield strength of weld metal was ~0.37 for the lowest N specimen and ~0.485 for the highest N specimen. However, high temperature ductility deteriorated with increasing N content. The presence of welding beads between the weld metal also reduced the elongation at room and high temperature rather than yield and tensile strength. The thermal fatigue characteristics are almost equal or better than those of the same materials prepared by the submerged welding method.

목차

Abstract
1. 서론
2. 실험방법
3. 결과 및 고찰
4. 결론
References

참고문헌 (16)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2018-581-001743443