메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
강유수 (Kangwon National University) 장웅기 (Kangwon National University) 서영호 (Kangwon National University) 김병희 (Kangwon National University)
저널정보
한국생산제조학회 한국생산제조학회지 한국생산제조학회지 Vol.26 No.6
발행연도
2017.12
수록면
599 - 604 (6page)
DOI
10.7735/ksmte.2017.26.6.599

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (3)

초록· 키워드

오류제보하기
This paper presents an aluminum anodic oxidation process after simulation of the electric field. Electric field simulation of the anodizing process was performed by the Ansys “MAXWELL” program. Electric field simulations of aluminum anodic oxidation were performed for a total of 12 models. When a current distribution grid layer was not used, the average current density deviation on the aluminum plate was 50.10 A/cm², and the average current density deviation of the actual experimental model with the current distribution grid layer was 0.008 A/cm². As a result, the current density deviation formed on the aluminum plate was reduced by a factor of 6,250 by using the current distribution grid layer. Based on the aluminum anodic oxidation experiment, the average thickness of the alumina layer was 563 nm ± 65 nm in the region where the current density value was uniform in the simulation.

목차

ABSTRACT
1. 서론
2. 본론
3. 실험
4. 요약 및 결론
References

참고문헌 (12)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0