메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
Druce Patrick Dunne (University of Wollongong) Willy Pang (Bisalloy Steels)
저널정보
대한용접·접합학회 대한용접·접합학회지 大韓熔接·接合學會誌 第36卷 第1號
발행연도
2018.2
수록면
41 - 49 (9page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
A one-pass-per-layer technique was used for narrow gap welding (NGW) of 50 ㎜ thick plate of quenched and tempered steel with 690 ㎫ minimum yield strength. GMAW and SAW were investigated for pulsed and non-pulsed welding using the same 1.2 ㎜ strength-matching welding consumable and the same nominal heat inputs for each of the pulsed and non-pulsed welds. The welds were defect-free and the hardness, tensile strength and Charpy impact energies were generally consistent with high weldment integrity. Pulsing of the welding current had the effect of slightly increasing side-wall fusion, flattening the weld bead and decreasing its volume. The most significant differences between the welds produced by GMAW and SAW were that SAW resulted in a lower peak HAZ hardness and higher HAZ Charpy values. These differences arise because different thermal cycles are associated with the two welding processes. Although the nominal heat inputs were the same, the effective heat inputs differed because of the different shielding methods and weld bead profiles. The HAZ hardness and CVN values are consistent with lower cooling rates for the SAW welds.

목차

Abstract
1. Introduction
2. Experimental materials and methods
3. Results and discussion
4. Conclusions
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2018-581-001832710