메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
범준규 (고려대학교) 김영관 (고려대학교) 김광준 (고려대학교) 김권희 (고려대학교)
저널정보
Korean Society for Precision Engineering Journal of the Korean Society for Precision Engineering Journal of the Korean Society for Precision Engineering Vol.36 No.2
발행연도
2019.2
수록면
163 - 168 (6page)
DOI
10.7736/KSPE.2019.36.2.163

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Intersecting holes deep inside a workpiece, are difficult to deburr because of poor accessibility. When holes are small and the intersecting angle (acute angle between hole axes) is less than 45°, difficulty is at its extreme. In this study, abrasive flow machining is used for a hole diameter of 3mm and intersecting angles of 30° and 45°. Tests were performed for AL6061 specimens, with process parameters allocated to L8(2<SUP>7</SUP>) orthogonal array. Degree of deburring is strongly dependent on intersecting angle, abrasive grit size, and total volume of flow. Successful deburring was achieved for 30° intersecting angle.

목차

1. 서론
2. 30° 교차구멍 디버링 실험
3. 45° 교차구멍 디버링 실험
4. 결론
REFERENCES

참고문헌 (21)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0