메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
S. S. Ahmad (Indian Institute of Science) G. Narayanan (Indian Institute of Science)
저널정보
전력전자학회 ICPE(ISPE)논문집 ICPE 2019-ECCE Asia
발행연도
2019.5
수록면
70 - 77 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this paper a method to evaluate the DC-link capacitor RMS current of a switched reluctance machine (SRM) drive under different operating conditions is presented. Square current reference is considered. Methods are developed for both soft chopping and hard chopping method of current control. A newly proposed simplified flux linkage model is used to evaluate converter switching functions and phase currents which are then used to evaluate the capacitor current stress. The capacitor current is found to be lower for soft chopping than for hard chopping. While the capacitor current is maximum at lowest operating speed with hard chopping, the maximum occurs at an intermediate speed for soft chopping for a given magnitude of current reference. The proposed method is useful to size the DC-link capacitor during the design of SRM drive.

목차

Abstract
I. INTRODUCTION
II. OPERATION AND CONTROL OF SRM
III. EVALUATION OF PHASE CURRENT AND DUTY
IV. EVALUATION OF CAPACITOR RMS CURRENT FOR SOFT CHOPPING OPERATION
V. EVALUATION OF CAPACITOR RMS CURRENT FOR HARD CHOPPING OPERATION
VI. SIMULATION AND EXPERIMENTAL RESULTS
VII. CONCLUSION
REFERENCES

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0