메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
Kai-Jun Pai (Ming Chi University of Technology) Po-Hsun Chen (Ming Chi University of Technology)
저널정보
전력전자학회 ICPE(ISPE)논문집 ICPE 2019-ECCE Asia
발행연도
2019.5
수록면
2,229 - 2,234 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The laser headlamp driver (LHD) possessing with a DC–DC converter, a feedback controller, and a safety standard circuit, was developed in this study. The buck–boost converter composed of the two–switch and two–diode for the DC–DC converter, which can be implemented in both boost or buck operations. Due to the operating ambient temperature of the laser diode causes the forward bias drift; using the feedback controller, the driving current of the leaser diode could be settled to deal with forward bias drift. In addition, the current overshoot exists when the operation of the buck–boost converter changes to the constant-current from the constant-voltage output mode, during the LHD start-up phase; the current overshoot would be exacerbated when laser diodes operate in the high ambient temperature. In this study, the proportional shifting proportional-integral technology was employed to the current-feedback controller to moderate the start-up current overshoot.

목차

Abstract
I. INTRODUCTION
II. DC-DC CONVERTER
III. CURRENT LOOP CONTROL
IV. DESIGN CONSIDERATION
V. EXPERIMENTAL WAVEFORMS
VI. CONCLUSION
REFERENCES

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0