지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 대한치과보철학회 The Journal of Advanced of Prosthodontics The Journal of Advanced of Prosthodontics 제7권 제1호
- 발행연도
- 2015.1
- 수록면
- 69 - 75 (7page)
이용수
초록· 키워드
오류제보하기
PURPOSE. To compare the shear bond strength of various veneering materials to grade II commercially pure titanium (CP-Ti). MATERIALS AND METHODS. Thirty specimens of CP-Ti disc with 9 mm diameter and 10 mm height were divided into three experimental groups. Each group was bonded to heat-polymerized acrylic resin (Lucitone 199), porcelain (Triceram), and indirect composite (Sinfony) with 7 mm diameter and 2 mm height. For the control group (n=10), Lucitone 199 were applied on type IV gold alloy castings. All samples were thermocycled for 5000 cycles in 5-55˚C water. The maximum shear bond strength (MPa) was measured with a Universal Testing Machine. After the shear bond strength test, the failure mode was assessed with an optic microscope and a scanning electron microscope. Statistical analysis was carried out with a Kruskal-Wallis Test and Mann-Whitney Test. RESULTS. The mean shear bond strength and standard deviations for experimental groups were as follows: Ti-Lucitone 199 (12.11 ± 4.44 MPa); Ti-Triceram (11.09 ± 1.66 MPa); Ti-Sinfony (4.32 ± 0.64 MPa). All of these experimental groups showed lower shear bond strength than the control group (16.14 ± 1.89 MPa). However, there was no statistically significant difference between the Ti-Lucitone 199 group and the control group, and the Ti-Lucitone 199 group and the Ti-Triceram group. Most of the failure patterns in all experimental groups were adhesive failures. CONCLUSION. The shear bond strength of veneering materials such as heat-polymerized acrylic resin, porcelain, and indirect composite to CP-Ti was compatible to that of heatpolymerized acrylic resin to cast gold alloy.
목차
등록된 정보가 없습니다.
참고문헌 (27)
참고문헌 신청
Adachi M / 1990 / Oxide adherence and porcelain bonding to titanium and Ti-6Al-4V alloy / J Dent Res 69 : 1230 ~ 1235
Andrade Tarozzo LS / 2003 / Comparison of retentive systems for composites used as alternatives to porcelain in fixed partial dentures / J Prosthet Dent 89 : 572 ~ 578
Atsu S / 2000 / Bond strength of three porcelains to two forms of titanium using two firing atmospheres / J Prosthet Dent 84 : 567 ~ 574
Barzilay I / 1988 / Mechanical and chemical retention of laboratory cured composite to metal surfaces / J Prosthet Dent 59 : 131 ~ 137
Cai Z / 2001 / Porcelain adherence to dental cast CP titanium: effects of surface modifications / Biomaterials 22 : 979 ~ 986
Andrade Tarozzo LS / 2003 / Comparison of retentive systems for composites used as alternatives to porcelain in fixed partial dentures / J Prosthet Dent 89 : 572 ~ 578
Atsu S / 2000 / Bond strength of three porcelains to two forms of titanium using two firing atmospheres / J Prosthet Dent 84 : 567 ~ 574
Barzilay I / 1988 / Mechanical and chemical retention of laboratory cured composite to metal surfaces / J Prosthet Dent 59 : 131 ~ 137
Cai Z / 2001 / Porcelain adherence to dental cast CP titanium: effects of surface modifications / Biomaterials 22 : 979 ~ 986
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Effect of dentin surface roughness on the shear bond strength of resin bonded restorations
The Journal of Advanced of Prosthodontics
2016 .01
-
다양한 방법으로 제작한 코발트-크롬 코어와 세라믹의 전단결합강도 비교
대한치과재료학회지
2017 .03
-
색소체용액 침투가 지르코니아 및 전장용 세라믹의 전단결합강도에 미치는 영향
대한치과기공학회지
2016 .01
-
지르코니아 코핑과 전장도재 간의 전단결합강도와 파절양상 비교
대한치과기공학회지
2015 .01
-
Shear bond strength of veneering ceramic to coping materials with different pre-surface treatments
The Journal of Advanced of Prosthodontics
2016 .01
-
Shear bond strength between CAD/CAM denture base resin and denture artificial teeth when bonded with resin cement
The Journal of Advanced of Prosthodontics
2020 .01
-
Porcelain repair - Influence of different systems and surface treatments on resin bond strength
The Journal of Advanced of Prosthodontics
2015 .01
-
Evaluation of the bond strength between aged composite cores and luting agent
The Journal of Advanced of Prosthodontics
2015 .01
-
치과 도재용착용 Ni-Cr 합금의 열처리에 따른 결합력 연구
대한치과기공학회지
2016 .01
-
지르코니아 프라이머 종류에 따른 복합레진-지르코니아의 전단결합강도
대한치과기공학회지
2016 .01
-
Polyetherketoneketone (PEKK)과 다양한 의치상용 전장 레진 간의 인장결합강도에 관한 연구
대한치과보철학회지
2022 .07
-
The effect of resin cement type and cleaning method on the shear bond strength of resin cements for recementing restorations
The Journal of Advanced of Prosthodontics
2017 .01
-
A study on the compatibility between one-bottle dentin adhesives and composite resins using micro-shear bond strength
Restorative Dentistry and Endodontics
2015 .01
-
코어 재료에 따른 비니어링 도재의 전단결합강도 비교
대한치과재료학회지
2016 .06
-
Effect of the Surface Treatment by Airborne-particle Abrasion on the Shear Bond Strength of Resin Cement to Hybrid Ceramic
대한통합치과학회지
2019 .01
-
The effect of ZrN coating for improved esthetics on shear bond strength between Cp titanium and heat-cured denture base resin
Oral Biology Research
2016 .01
-
Scanning electron microscopy analysis of metallic and aesthetic bracket meshes before and after debonding
대한치과교정학회지
2025 .01
-
의치상 레진과 이장 레진 간의 결합강도 비교
대한치과기공학회지
2017 .01
-
In Vitro Study on the Bond Strength Between 3D-Printed Resin and Resin Cement for Pediatric Crown Restoration
대한소아치과학회지
2023 .02
-
도재용착용 Ni-Cr계 합금의 이트륨 첨가물이 도재전단결합강도에 미치는 영향
대한치과기공학회지
2019 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0