지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 대한치과보철학회 The Journal of Advanced of Prosthodontics The Journal of Advanced of Prosthodontics 제7권 제5호
- 발행연도
- 2015.1
- 수록면
- 343 - 348 (6page)
이용수
초록· 키워드
오류제보하기
PURPOSE. The purpose of this study was to evaluate the bond strength of composite resin on the fracture surface of metal-ceramic depending on the repair systems and surface roughening methods. MATERIALS AND METHODS. A total of 30 disk specimens were fabricated, 15 of each were made from feldspathic porcelain and nickel-chromium base metal alloy. Each substrate was divided into three groups according to the repair method: a) application of repair system I (Intraoral Repair Kit) with diamond bur roughening (Group DP and DM), b) application of repair system I with airborne-particle abrasion (Group SP and SM), and c) application of repair system II (CoJet Intraoral Repair System, Group CP and CM). All specimens were thermocycled, and the shear bond strength was measured. The data were analyzed using the Kruskal-Wallis analysis and the Mann-Whitney test with a significance level of 0.05. RESULTS. For the porcelain specimens, group SP showed the highest shear bond strength (25.85 ± 3.51 MPa) and group DP and CP were not significantly different. In metal specimens, group CM showed superior values of bond strength (13.81 ± 3.45 MPa) compared to groups DM or SM. CONCLUSION. Airborne-particle abrasion and application of repair system I can be recommended in the case of a fracture localized to the porcelain. If the fracture extends to metal surface, the repair system II is worthy of consideration.
목차
등록된 정보가 없습니다.
참고문헌 (26)
참고문헌 신청
[학술지(정기간행물)
Barzilay I / 1988 / Mechanical and chemical retention of laboratory cured composite to metal surfaces / J Prosthet Dent 59 : 131 ~ 137
Borges GA / 2003 / Effect of etching and airborne particle abrasion on the microstructure of different dental ceramics / J Prosthet Dent 89 : 479 ~ 488
Chen JH / 1998 / Effect of etchant, etching period, and silane priming on bond strength to porcelain of composite resin / Oper Dent 23 : 250 ~ 257
Coornaert J / 1984 / Long-term clinical study of porcelain-fused-to-gold restorations / J Prosthet Dent 51 : 338 ~ 342
Barzilay I / 1988 / Mechanical and chemical retention of laboratory cured composite to metal surfaces / J Prosthet Dent 59 : 131 ~ 137
Borges GA / 2003 / Effect of etching and airborne particle abrasion on the microstructure of different dental ceramics / J Prosthet Dent 89 : 479 ~ 488
Chen JH / 1998 / Effect of etchant, etching period, and silane priming on bond strength to porcelain of composite resin / Oper Dent 23 : 250 ~ 257
Coornaert J / 1984 / Long-term clinical study of porcelain-fused-to-gold restorations / J Prosthet Dent 51 : 338 ~ 342
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Repair bond strength of resin composite to three aged CAD/CAM blocks using different repair systems
The Journal of Advanced of Prosthodontics
2020 .01
-
Repair bond strengths of non-aged and aged resin nanoceramics
The Journal of Advanced of Prosthodontics
2017 .01
-
도재용착용 비귀금속 합금(Co-Cr)과 세라믹의 소성술식에 따른 전단결합강도 분석
대한치과기공학회지
2017 .01
-
Comparison of traditional and simplified methods for repairing CAD/CAM feldspathic ceramics
The Journal of Advanced of Prosthodontics
2017 .08
-
Comparative analysis of bond strength to root dentin and compression of bioceramic cements used in regenerative endodontic procedures
Restorative Dentistry and Endodontics
2021 .11
-
Repair bond strength of resin composite to bilayer dental ceramics
The Journal of Advanced of Prosthodontics
2018 .01
-
Effect of adhesive application method on repair bond strength of composite
Restorative Dentistry and Endodontics
2021 .08
-
3D 프린팅 기술의 의료기기 수리 적용에 대한 국내 규제 이슈 및 기술적 적합성 평가
의공학회지
2020 .01
-
Effect of dentin surface roughness on the shear bond strength of resin bonded restorations
The Journal of Advanced of Prosthodontics
2016 .01
-
Comparison of the clinical outcomes and repair integrity after arthroscopic delaminated rotator cuff repair : Prospective randomized evaluation between separate double-layer double-row repair vs. En mass repair
대한견주관절의학회 학술대회논문집
2015 .04
-
반복소성이 도재의 결합강도에 미치는 영향
대한치과재료학회지
2015 .12
-
Singe row repair for tension-free repair vs. suture-bridge repair for coverage of foot-print
대한견주관절의학회 학술대회논문집
2022 .11
-
Singe row repair for tension-free repair vs. suture-bridge repair for coverage of foot-print
대한견주관절의학회 학술대회논문집
2022 .11
-
치과 도재용착용 Ni-Cr 합금의 열처리에 따른 결합력 연구
대한치과기공학회지
2016 .01
-
Effect of the Surface Treatment by Airborne-particle Abrasion on the Shear Bond Strength of Resin Cement to Hybrid Ceramic
대한통합치과학회지
2019 .01
-
When Should We Repair Partial-Thickness Rotator Cuff Tears? Outcome Comparison Between Immediate Surgical Repair Versus Delayed Repair After 6-Month Period of Nonsurgical Treatment
대한견주관절의학회 학술대회논문집
2019 .03
-
도재용착용 Ni-Cr계 합금의 이트륨 첨가물이 도재전단결합강도에 미치는 영향
대한치과기공학회지
2019 .01
-
Comparative study of the shear bond strength of various veneering materials on grade II commercially pure titanium
The Journal of Advanced of Prosthodontics
2015 .01
-
Bonding of conventional provisional resin to 3D printed resin: the role of surface treatments and type of repair resins
The Journal of Advanced of Prosthodontics
2020 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0