메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
Dragica Jošt (Kolektor Turboinštitut) Aljaž Škerlavaj (Kolektor Turboinštitut) Valentin Pirnat (Kolektor Turboinštitut) Mitja Morgut (University of Trieste) Enrico Nobile (University of Trieste)
저널정보
한국유체기계학회 International Journal of Fluid Machinery and Systems International Journal of Fluid Machinery and Systems Vol.12 No.4
발행연도
2019.12
수록면
388 - 399 (12page)
DOI
10.5293/IJFMS.2019.12.4.388

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This paper presents results of the numerical analysis of two Pelton turbines: a 6-jet turbine for middle head and a 2-jet turbine for high head. For the 6-jet turbine losses in manifold, quality of the jets and turbine efficiency were predicted and validated with the experimental data. Additional improvement of accuracy of efficiency prediction was obtained with cavitation modelling. It was also checked that there was no interaction between the evacuating water sheets and the incoming jets. For a 2-jet turbine cavitation prediction was done. Small vapour cavity at the inner side and a larger one at the back side of the bucket were observed. Detailed analysis of cavitation and condensation processes showed that the conditions for cavitation pitting were not fulfilled.

목차

Abstract
1. Introduction
2. Mathematical model
3. Numerical set-up and computational meshes
4. Numerical flow simulation in a 6-jet Pelton turbine
5. Cavitation prediction for a 2-jet high head Pelton turbine
6. Conclusions
References

참고문헌 (16)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2020-554-000379394