지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2020.4
- 수록면
- 110 - 119 (10page)
이용수
초록· 키워드
오류제보하기
Explosions and fires on offshore drilling units and process plants, which cause loss of life and environmental damage, have been studied extensively. However, research on drilling units increased only after the 2010 Deepwater Horizon accident in the Gulf of Mexico. A major reason for explosions and fires on a drilling unit is blowout, which is caused by a failure to control the high temperatures and pressures upstream of the offshore underwater well. The area susceptible to explosion and fire due to blowout is the drill floor, which supports the main drilling system. Structural instability and collapse of the drill floor can threaten the structural integrity of the entire unit. This study simulates the behavior of fire subsequent to blowout and assesses the thermal load. A heat transfer structure analysis of the drill floor was carried out using the assessed thermal load, and the risk was noted. In order to maintain the structural integrity of the drill floor, passive fire protection of certain areas was recommended.
목차
ABSTRACT
1. Introduction
2. Fire Analysis
3. Heat Transfer Analysis
4. Nonlinear structural response analysis
5. Application of passive fire protection
6. Conclusion
References
참고문헌 (21)
참고문헌 신청
ABS Consulting. (2015). Case Study 2: Deepwater Drilling with Surface BOP from a Floating Facility. The Bureau of Safety and Environmental Enforcement (BSEE). Retrieved from https://www.bsee.gov/sites/bsee.gov/files/752ac.pdf
Ahmad, A., Hassan, S.A., Ripin, A., Ali, M.W., & Haron, S. (2013). A Risk-based Method for Determining Passive Fire Protection Adequacy. Fire Safety Journal, 58, 160-169. https://doi.org/10.1016/j.firesaf.2013.01.020
Amdahl, J., Holmas, T., & Skallerud, B. (2003). Ultimate Strength of Structural Members with Attachments during Accidental Fires. Proceedings of International Conference of Response of Structures to Extreme Loading, Tronto, Canada.
American Petroleum Institute (API). (2006). Recommended Practice for the Design of Offshore Facilities Against Fire and Blast Loading. API Publishing Services, Washington.
Bai, Y., & Jin, W.L. (2016). Marine Structural Design (2nd ed). Elsevier Butterworth Heinemann, UK.
Amdahl, J., Holmas, T., & Skallerud, B. (2003). Ultimate Strength of Structural Members with Attachments during Accidental Fires. Proceedings of International Conference of Response of Structures to Extreme Loading, Tronto, Canada.
American Petroleum Institute (API). (2006). Recommended Practice for the Design of Offshore Facilities Against Fire and Blast Loading. API Publishing Services, Washington.
Bai, Y., & Jin, W.L. (2016). Marine Structural Design (2nd ed). Elsevier Butterworth Heinemann, UK.
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Prediction Model of Performance for Rock Drilling System
유공압건설기계학회 학술대회논문집
2019 .06
-
천공기의 Machine Control을 위한 개념설계와 메타버스를 이용한 실증
유공압건설기계학회 학술대회논문집
2022 .12
-
콘크리트 다 천공 메커니즘 설계
한국정밀공학회 학술발표대회 논문집
2017 .12
-
마이크로 드릴에 의한 구멍 가공시 드릴의 손상과 구멍의 관찰
한국기계기술학회지
2016 .01
-
천공효율 향상을 위한 천공기의 최적 운용조건 결정
한국정밀공학회 학술발표대회 논문집
2015 .05
-
A Study on Monitoring Drilling using Torque from Main Spindle Based on PLC in CNC Machine Tools
한국기계가공학회지
2018 .06
-
Development of drill monitoring system in Ti6Al4V drilling process using infrared sensor
한국생산제조학회 학술발표대회 논문집
2018 .10
-
육상시추 시스템용 방향제어 추진체의 수치해석 기법 분석
대한기계학회 춘추학술대회
2017 .11
-
고경도 소재 가공을 위한 다이아몬드 전착 드릴의 형상 최적화에 관한 연구
한국생산제조학회지
2020 .04
-
Inside Blowout Preventer 고압밸브의 자재 특성에 관한 연구
대한기계학회 춘추학술대회
2015 .02
-
Applications of Clustering Models in Offshore Drilling for Crude Oil and Natural Gas
Industrial Engineering & Management Systems
2019 .03
-
유한요소법을 이용한 방향성 시추의 동적 분석과 ROP계산
설비공학논문집
2021 .01
-
Surface-set Diamond Bit Design for Deep-Sea Operating Environment of Seafloor Drill and Hole-Bottom Flow Field Analysis
International Journal of Fluid Machinery and Systems
2022 .06
-
현장 시추공 궤적 데이터를 활용한 방향성 시추 동적 모델 평가
대한설비공학회 학술발표대회논문집
2022 .06
-
A Study on Improved Drill Shape for Efficient Drilling of Inconel 718 Using the Design of Experiment
Journal of the Korean Society for Precision Engineering
2017 .03
-
Evaluation of classifier performance in fault diagnosis of twist drill
한국생산제조학회 학술발표대회 논문집
2020 .10
-
Defect Detection of Laser Drilling Micro Holes Using Photodiode Sensor and Autoencoders
한국정밀공학회 학술발표대회 논문집
2021 .11
-
드릴링 추력을 이용한 드릴의 인프로세스 파손 검출
한국생산제조학회지
2018 .10
-
Indirect tool monitoring in drilling based on gap sensor signal and Artificial Neural Network
한국생산제조학회 학술발표대회 논문집
2020 .07
-
효율적인 드릴 작업을 위한 자동 드릴 장치 설계
한국기계가공학회 춘추계학술대회 논문집
2021 .06
이 논문의 저자 정보
최근 본 자료
댓글(0)
0