메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
전준호 (부경대학교) 조굉무 (부경대학교) 박영규 (에콤) 이연원 (부경대학교)
저널정보
한국동력기계공학회 동력시스템공학회지 동력시스템공학회지 제24권 제2호
발행연도
2020.4
수록면
30 - 36 (7page)
DOI
10.9726/kspse.2020.24.2.030

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The steam generator in a nuclear power plant should provide high quality steam to the turbine for better efficiency and stability. For this purpose, a steam separator is installed in the steam generator to manage the quality of the steam. In this study, computational fluid dynamics (CFD) technique was carried out to analyze the flow phenomenon of the swirl-vane type steam separator. When the steam enters the swirl-vane separator with droplets, it is affected by the centrifugal force. Some of the droplets are attached to the riser wall, some pass through the outlet (bypass and the downstream pipe) and the remaining droplets enter the next separator. A Lagrangian particle model was used to simulate the behaviors of steam and water droplets. The results show that the removal of the droplets depend on the size of the droplets. When the droplet size is small, it is removed by the outlet. In particular for the droplet size of 0.01 micron, over 75% of them are removed. When the droplet size is large, it is collected on the wall. In particular for the droplet size of 50 micron, over 95% of them are collected on the wall. Thus, the performance of the separator decreases as the droplet enters the next separator directly before being collected on the walls or on the outlet if the length of the riser above the swirl-vane is short.

목차

Abstract
1. 서론
2. 수치해석
3. 해석 결과
4. 결론
References

참고문헌 (8)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2020-550-000580711