메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
이태용 (국민대학교) 조용석 (국민대학교) 유준상 (국민대학교) 최종근 (국민대학교) 정한샘 (국민대학교) 민병혁 (현대자동차) 서주형 (현대자동차)
저널정보
한국자동차공학회 한국자동차공학회논문집 한국자동차공학회논문집 제28권 제6호
발행연도
2020.6
수록면
381 - 388 (8page)
DOI
10.7467/KSAE.2020.28.6.381

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The ongoing pursuit of reducing CO₂ by using alternative fuels is a driving force in the production of flex fuel vehicles (FFVs) worldwide. In the case of gasoline direct injection(GDI) FFV engines, however, the mixture quality in the cylinder directly affects the combustion characteristics. In addition, engine performance significantly deteriorates due to the poor mixture quality. In this study, numerical analysis was performed on the vaporization of fuels in the cylinder with varying engine speeds and loads. The results of the numerical analysis showed that the vaporization rate of ethanol in the cylinder is lower than that of gasoline due to the differences in fuel properties. In the case of gasoline, the vaporization process is completed before the spark onset and there is no significant influence on the combustion characteristics. In the case of ethanol, it is considered possible for particulate matters to be produced massively due to incomplete vaporization under the conditions of increased loads and engine speeds. This result is intended to be utilized as a basic data for the fuel injection control strategy in the development of FFV engines.

목차

Abstract
1. 서론
2. 해석 모델 및 해석 조건
3. 해석 결과
4. 결론
References

참고문헌 (8)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2020-556-000605322