Friction Stir Welding of EN 10130 Low Carbon Steel

Akbar Alimohamady; Abbas Eghlimi; Hosain Nourozi Foroshani; Mohamad Alipour Behzadi; Javad Mohammadi; Masoud Kasiri Asgarani

추천

검색

질문

자료유형: 학술저널

저자정보: Akbar Alimohamady (Islamic Azad University) Abbas Eghlimi (Isfahan University of Technology) Hosain Nourozi Foroshani (Polytechnic University) Mohamad Alipour Behzadi (Shahid Chamran University of Ahvaz) Javad Mohammadi (University of Windsor) Masoud Kasiri Asgarani (Islamic Azad University)

저널정보: 대한용접·접합학회 대한용접·접합학회지 大韓熔接·接合學會誌第38卷第3號

발행연도: 2020.6

수록면: 269 - 277 (9page)

이용수

📌

연구주제

📖

연구배경

🔬

연구방법

🏆

연구결과

초록· 키워드

오류제보하기

After evaluating the weldability of 1.5 ㎜ thick EN 10130 steel sheets, the influence of friction stir welding parameters, i.e., rotation speed, tool advancing speed, pin diameter, and shoulder diameter on the properties of sound joints was examined. Using metallography, scanning electron microscope, tensile test, microhardness measurement, limiting dome height test, and forming limit diagrams, it was found that having a flawless joint requires the rotation and advancing speeds to be in the range of 500-1000 rpm and 30-160 ㎜.min<SUP>-1</SUP>, respectively. A design of experiment with 29 samples based on the Box-Behnken response surface methodology method with 5 center points was then utilized to maximize the tensile strength. Accordingly, the safe range and an optimized point for welding parameters were defined.

#Friction stir welding #Low carbon steel #DOE #RSM

참고문헌 (24)

참고문헌 신청

M. B. Bilgin / 2012 / The effect of tool rotational and traverse speed on friction stir weldability of AISI 430 ferritic stainless steels / Mater. Des 33:376~383

M. Ghaffarpour / 2017 / Evaluation of dissimilar joints properties of 5083-H12 and 6061-T6 aluminum alloys produced by tungsten inert gas and friction stir welding / J. Mater. : Des. Appl 231(3):297~308

R. Pouriamanesh / 2018 / Micro Structure and Hardness of Steel-TiO2 Composite produced by Friction Stir Welding / Indian J. Sci. Technol. Composite, Friction Stir Welding (FSW), Hardness Microstructure 11(8)

K. P. Mehta / 2016 / Effects of Tool Pin Design on Formation of Defects in Dissimilar Friction Stir Welding / Proc. Technol. 23:513~518

R. Padmanaban / 2014 / Simulated Annealing Based Parameter Optimization for Friction Stir Welding of Dissimilar Aluminum Alloys / Proc. Eng 97:864~870

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!